OSHA SearchOSHA records by employer

K Woodwork Inc.: OSHA inspections and violations

Hialeah, Florida · Finish Carpentry Contractors · NAICS 238350

1inspections
8citation items
$6,423current penalties
Mar 25, 2019last inspection

K Woodwork Inc. has one OSHA inspection on record in Florida.

OSHA opened it on Mar 25, 2019 as part of a related case, in Hialeah.

From that inspection OSHA issued 8 citation items: 7 serious and 1 other-than-serious.

OSHA proposed $10,231 in penalties. After settlements and reviews the total is $6,423, down 37%.

Most often, OSHA cited 1910.213, woodworking machinery (6 items).

For context, across all construction employers the median penalty per cited inspection since 2015 is $3,080. K Woodwork Inc. averages $6,423 over 1 cited inspection in that time.

K Woodwork Inc.: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Florida · latest 90 days of OSHA records

326employers cited

Get notified the morning OSHA posts each new citation in Florida: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Florida

Checking a subcontractor, a client or your own company? Watch K Woodwork Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343874863 OPENED MAR 25, 2019Closed

Unprogrammed related · Partial · Safety · 2 employees at the site · Closed Mar 10, 2020

8193 Nw 98th St, Hialeah, FL 33016 · Finish Carpentry Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.22(a)(1) · Walking-working surfaces
Serious$1,705$1,023May 29, 2019Final
Citation 1, item 2a
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$2,842$1,989May 29, 2019Final
Citation 1, item 2b
29 CFR 1910.213(c)(2) · Woodworking machinery
Serious$0$0May 29, 2019Final
Citation 1, item 2c
29 CFR 1910.213(c)(3) · Woodworking machinery
Serious$0$0May 29, 2019Final
Citation 1, item 2d
29 CFR 1910.213(d)(1) · Woodworking machinery
Serious$0$0May 29, 2019Final
Citation 1, item 3
29 CFR 1910.213(h)(1) · Woodworking machinery
Serious$2,842$1,705May 29, 2019Final
Citation 1, item 4
29 CFR 1910.213(h)(4) · Woodworking machinery
Serious$2,842$1,705May 29, 2019Final
Citation 2, item 1
29 CFR 1910.305(g)(2)(iii) · Electrical wiring methods
Other-than-serious$0$0May 29, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

29 CFR 1910.213(c)(3)

(3) Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut.

29 CFR 1910.22 · Walking-working surfaces

29 CFR 1910.305 · Electrical wiring methods

Other finish carpentry contractors employers in Florida

Alert subscribers get notified of each newly cited employer in Florida the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.