Since 2008, OSHA inspectors have visited Kennametal, Inc. in Massachusetts 2 times.
The most recent inspection opened on May 3, 2021 after a complaint, in Greenfield.
In all, OSHA issued 6 citation items: 3 serious and 3 other-than-serious.
The proposed penalties came to $20,883; today they stand at $7,711, 63% less.
The rule cited most here is 1910.305 (electrical wiring methods), 5 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Kennametal, Inc. averages $5,461 across 1 cited inspection.
Kennametal, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Massachusetts · latest 90 days of OSHA records
256employers cited
Get notified the morning OSHA posts each new citation in Massachusetts: the employer, the site address, the rules broken and the penalty.
OSHA records show Kennametal, Inc. at 15 sites in 5 states. Together they've had 59 inspections and $41,140 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 15 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Greenfield site logged 1 recordable injury or illness among about 17 workers: 6.4 per 100 full-time workers, against a median of 2.3 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Greenfield site
Greenfield · 2025
17
1
0
6.4
2.3
Included with any plan: 9 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.303 · Electrical equipment, general requirements
29 CFR 1910.303(g)(1)(i)
(i) Working space for equipment likely to require examination, adjustment, servicing, or maintenance while energized shall comply with the following dimensions, except as required or permitted elsewhere in this subpart:
(v) Where open conductors cross ceiling joints and wall studs and are exposed to physical damage (for example, located within 2.13 m (7.0 ft) of the floor), they shall be protected.
29 CFR 1910.305(g)(1)(iiia)
(iii) If used as permitted in paragraphs (g)(1)(ii)(C), (g)(1)(ii)(G), or (g)(1)(ii)(I) of this section, the flexible cord shall be equipped with an attachment plug and shall be energized from an approved receptacle outlet.
Other hardware manufacturing employers in Massachusetts
Alert subscribers get notified of each newly cited employer in Massachusetts the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.