OSHA SearchOSHA records by employer

Kiwo Inc: OSHA inspections and violations

Seabrook, Texas · Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing · NAICS 325992

1inspections
3citation items
$4,835current penalties
May 6, 2021last inspection

Kiwo Inc has one OSHA inspection on record in Texas.

OSHA opened it on May 6, 2021 on a referral, in Seabrook.

From that inspection OSHA issued 3 citation items: 3 serious.

OSHA proposed $8,058 in penalties. After settlements and reviews the total is $4,835, down 40%.

Most often, OSHA cited 1910.147, lockout/tagout (2 items).

For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. Kiwo Inc averages $4,835 over 1 cited inspection in that time.

Kiwo Inc also files yearly injury logs with OSHA, summarized below.

It reported 1 severe injury to OSHA since 2015.

Kiwo Inc: OSHA citation items per year, 2021 to 2021
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

391employers cited

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch Kiwo Inc and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345297600 OPENED MAY 6, 2021Closed

Referral · Partial · Safety · 41 employees at the site · Closed Feb 8, 2022

1929 Marvin Circle, Seabrook, TX 77586 · Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Apr 30, 2021: Employee fractures leg when pulled into shaft cleaning machi

At 4:05 p.m. on April 30, 2021, an employee working as a production helper for a manufacturer of photographic films and chemicals was cleaning a Shar System Model D758N Mixer/Dispenser. The employee was cleaning the shaft and the attached dispersion blades with water and a painter's scraper. The cleaning procedure calls for a the shaft and blade to be rotating slowly in a drum of water while being sprayed down with the water. At some point, the employee was struck by the rotating shaft and blade which was still sticky from emulsifier and water. The employee was then drawn into the shaft while it was still spinning. The employee was rendered helpless until fellow employees in the area were able to hit the emergency stop button on the control panel and free employee from the shaft. The employee was hospitalized to treat a fractured tibia and fibula.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(1) · Machine guarding
Serious$1,791$1,074Oct 25, 2021Final
Citation 1, item 2a
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
Serious$6,267$3,761Oct 25, 2021Final
Citation 1, item 2b
29 CFR 1910.147(d)(2) · Lockout/tagout
Serious$0$0Oct 25, 2021Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2025, the Seabrook site logged 2 recordable injuries or illnesses among about 40 workers: 5.5 per 100 full-time workers, against a median of 1.6 for its industry.

Site and yearWorkersCasesDays-away casesRateIndustry median
Kiwo Inc.
Seabrook · 2025
40 205.51.6

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Apr 30, 2021, Seabrook: Hospitalization · fractures · lower leg(s)

An employee was spraying down the shaft and blade of a mixer. The employee became stuck to the shaft, which was still sticky, and was pulled in and spun around. The employee suffered a broken tibia and fibula and was hospitalized.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(i)

(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.

29 CFR 1910.147(d)(2)

(2) Machine or equipment shutdown. The machine or equipment shall be turned off or shut down using the procedures established for the machine or equipment. An orderly shutdown must be utilized to avoid any additional or increased hazard(s) to employees as a result of the equipment stoppage.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

Other photographic film, paper, plate, chemical, and copy toner manufacturing employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.