OSHA SearchOSHA records by employer

Kovil Manufacturing, LLC: OSHA inspections and violations

Cheshire, Connecticut · Machine Shops · NAICS 332710

1inspections
6citation items
$2,520current penalties
Feb 23, 2016last inspection

OSHA inspectors have visited Kovil Manufacturing, LLC in Connecticut one time.

It opened on Feb 23, 2016 after a complaint, in Cheshire.

In all, OSHA issued 6 citation items: 5 serious and 1 other-than-serious.

The proposed penalties came to $3,600; today they stand at $2,520, 30% less.

The rule cited most here is 1910.215 (grinders and abrasive wheels), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Kovil Manufacturing, LLC averages $2,520 across 1 cited inspection.

Kovil Manufacturing, LLC: OSHA citation items per year, 2016 to 2016
Citation items per year, by inspection date.

Connecticut · latest 90 days of OSHA records

84employers cited

Get notified the morning OSHA posts each new citation in Connecticut: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Connecticut

Checking a subcontractor, a client or your own company? Watch Kovil Manufacturing, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 341272912 OPENED FEB 23, 2016Closed

Complaint · Partial · Safety · 4 employees at the site · Closed Feb 21, 2017

1486 Highland Avenue, Ste 2, Cheshire, CT 06410 · Machine Shops · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(1) · Machine guarding
Serious$1,200$840Apr 5, 2016Final
Citation 1, item 2a
29 CFR 1910.215(a)(1) · Grinders and abrasive wheels
Serious$1,200$840Apr 5, 2016Final
Citation 1, item 2b
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
Serious$0$0Apr 5, 2016Final
Citation 1, item 2c
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Serious$0$0Apr 5, 2016Final
Citation 1, item 3
29 CFR 1910.219(c)(4)(i) · Belts, pulleys and power-transmission parts
Serious$1,200$840Apr 5, 2016Final
Citation 2, item 1
29 CFR 1910.132(d)(2) · Personal protective equipment, general requirements
Other-than-serious$0$0Apr 5, 2016Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.132 · Personal protective equipment, general requirements

29 CFR 1910.132(d)(2)

(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(a)(1)

(a) General requirements—(1) Machine guarding. Abrasive wheels shall be used only on machines provided with safety guards as defined in the following paragraphs of this section, except:

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

Other machine shops employers in Connecticut

Alert subscribers get notified of each newly cited employer in Connecticut the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.