OSHA has inspected Kuka Assembly & Test Corp 2 times in Michigan since 2016.
The latest one began on Sep 23, 2021 on a referral, in Saginaw.
Those inspections ended with 6 citation items: 5 serious and 1 other-than-serious.
Penalties were first proposed at $13,300 and now stand at $6,650, 50% lower after settlements or reviews.
Lockout/tagout comes up most often in these citations: 4 items under 1910.147.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Kuka Assembly & Test Corp averages $3,325 (2 cited inspections).
Kuka Assembly & Test Corp also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Michigan · latest 90 days of OSHA records
665employers cited
Get notified the morning OSHA posts each new citation in Michigan: the employer, the site address, the rules broken and the penalty.
Incident on Aug 25, 2021: Employee fractures leg while adjusting cam on shear with ste
At 8:30 a.m. on August 25, 2021, an employee working as an assembler for an industrial design service was attempting to adjust the cam on a shear that was not aligned correctly. The employee did not adequately lock out the equipment and was using a 1-inch steel bar to make the adjustment. After making a few turns of the cam shaft, the shear ram engaged grabbing the bar and striking the employee in the leg. The employee was hospitalized to treat a fractured femur and lacerated arm.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Saginaw site logged 1 recordable injury or illness among about 121 workers: 0.7 per 100 full-time workers, against a median of 2.1 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Kuka Assembly and Test Corp Saginaw
Saginaw · 2025
121
1
0
0.7
2.1
Saginaw - KUKA Assembly and Test Corp.
Saginaw · 2021
271
6
3
2.8
2.1
Included with any plan: 7 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(5)(i)
(5) Protective materials and hardware. (i) Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware shall be provided by the employer for isolating, securing or blocking of machines or equipment from energy sources.
29 CFR 1910.147(c)(6)(i)
(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.
Other metalworking machinery manufacturing employers in Michigan
Alert subscribers get notified of each newly cited employer in Michigan the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.