OSHA SearchOSHA records by employer

Lake Champlain Roofing, LLC.: OSHA inspections and violations

Plattsburgh, New York · Sawmills · NAICS 321113

2inspections
3citation items
$5,389current penalties
Nov 20, 2020last inspection

Lake Champlain Roofing, LLC. has 2 OSHA inspections on record in New York, the first in 2019.

OSHA's last visit started on Nov 20, 2020 on a referral, in Keeseville.

Across those inspections OSHA issued 3 citation items: 2 serious and 1 other-than-serious.

OSHA proposed $7,690 in penalties. After settlements and reviews the total is $5,389, down 30%.

For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. Lake Champlain Roofing, LLC. averages $2,694 over 2 cited inspections in that time.

It reported 2 severe injuries to OSHA since 2015.

Lake Champlain Roofing, LLC.: OSHA citation items per year, 2019 to 2020
Citation items per year, by inspection date.

New York · latest 90 days of OSHA records

353employers cited

2 of them in the same industry

Get notified the morning OSHA posts each new citation in New York: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in New York

Checking a subcontractor, a client or your own company? Watch Lake Champlain Roofing, LLC. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345032791 OPENED NOV 20, 2020Closed

Referral · Partial · Safety · 13 employees at the site · Closed Apr 1, 2021

1456 State Route 9, Keeseville, NY 12944 · Roofing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.502(h)(1)(v) · Fall protection systems
Serious$3,901$2,926Mar 18, 2021Final
Citation 2, item 1
29 CFR 1926.503(b)(1) · Fall protection training in construction
Other-than-serious$0$0Mar 18, 2021Final

Inspection 343978698 OPENED MAY 2, 2019Closed

Referral · Partial · Safety · 16 employees at the site · Closed Jun 20, 2019

7631 Route 9, Plattsburgh, NY 12901 · Sawmills · OSHA's record · Phone and website on Google Maps

Incident on Apr 30, 2019: Employee lacerates fingertip while using table saw, later re

At 2:45 p.m. on April 30, 2019, an employee was working as a roofer for a roofing contractor. He was cutting wooden shingles with a table saw. A shingle got caught between the guide and the blade. The shingle kicked back and hit the employee's left hand, causing it to come into contact with the blade. The employee suffered a laceration of the pointer or index finger on his left hand. A doctor later amputated the fingertip. The employee was hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$3,789$2,463May 23, 2019Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.

Nov 17, 2020, Keeseville: Hospitalization · fractures · upper and lower limb(s)

An employee fell off a flat roof onto the gravel ground. The employee sustained a fractured leg and wrist.

Apr 30, 2019, Plattsburgh: Amputation · amputations · fingertip(s)

An employee was using a table saw to cut wooden shingles. The shingles kicked back and the employee's hand contacted the blade resulting in a laceration to the left index finger. The fingertip was medically amputated.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1926.502 · Fall protection systems

29 CFR 1926.502(h)(1)(v)

(v) The safety monitor shall not have other responsibilities which could take the monitor's attention from the monitoring function.

29 CFR 1926.503 · Fall protection training in construction

29 CFR 1926.503(b)(1)

(b) Certification of training. (1) The employer shall verify compliance with paragraph (a) of this section by preparing a written certification record. The written certification record shall contain the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer. If the employer relies on training conducted by another employer or completed prior to the effective date of this section, the certification record shall indicate the date the employer determined the prior training was adequate rather than the date of actual training.

Other sawmills employers in New York

Alert subscribers get notified of each newly cited employer in New York the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.