Verona, Wisconsin · All Other Miscellaneous Fabricated Metal Product Manufacturing · NAICS 332999
4inspections
8citation items
$25,650current penalties
May 29, 2025last inspection
Latitude Corp has 4 OSHA inspections on record in Wisconsin, the first in 2002.
OSHA's last visit started on May 29, 2025 on a referral, in Verona.
Across those inspections OSHA issued 8 citation items: 7 serious and 1 other-than-serious.
OSHA proposed $30,774 in penalties. After settlements and reviews the total is $25,650, down 17%.
Most often, OSHA cited 1910.212, machine guarding (4 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Latitude Corp averages $11,775 over 2 cited inspections in that time.
Latitude Corp also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Wisconsin · latest 90 days of OSHA records
232employers cited
5 of them in the same industry
Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Verona site logged 7 recordable injuries or illnesses among about 174 workers: 3.8 per 100 full-time workers, against a median of 2.4 for its industry. Those cases cost 173 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Latitude Corporation
Verona · 2025
174
7
2
3.8
2.4
Latitude Corp
Verona · 2024
155
6
2
4.0
2.7
Latitude Corp North
Verona · 2022
152
14
5
8.6
2.7
Latitude Corp Verona
Verona · 2021
155
14
6
8.9
2.4
Latitude Corp. (North)
Verona · 2019
186
15
8
8.2
2.4
WI Latitude Corp
Verona · 2017
172
9
5
5.1
2.4
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
An employee was operating a drill press when a rag they were holding was caught in the drill bit, resulting in partial amputation of their left thumb.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(2)
(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(6)(i)
(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.