OSHA SearchOSHA records by employer

Lemx Corp.: OSHA inspections and violations

New York, New York · Masonry Contractors · NAICS 238140

1inspections
3citation items
$8,300current penalties
Sep 24, 2025last inspection

OSHA inspectors have visited Lemx Corp. in New York one time.

It opened on Sep 24, 2025 on a referral, in New York.

In all, OSHA issued 3 citation items: 3 serious.

The proposed penalties came to $11,916; today they stand at $8,300, 30% less.

The rule cited most here is 1926.451 (scaffolds, general requirements), 3 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,079 penalty. Lemx Corp. averages $8,300 across 1 cited inspection.

Lemx Corp.: OSHA citation items per year, 2025 to 2025
Citation items per year, by inspection date.

Want to know if OSHA cites Lemx Corp. again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 348524349 OPENED SEP 24, 2025Closed

Referral · Partial · Safety · 14 employees at the site · Closed Sep 4, 2026

55 John Street, New York, NY 10038 · Masonry Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.451(f)(3) · Scaffolds, general requirements
 Serious$3,972$2,766Feb 26, 2026Final
Citation 1, item 2
29 CFR 1926.451(g)(4)(ii) · Scaffolds, general requirements
 Serious$3,972$2,767Feb 26, 2026Final
Citation 1, item 3
29 CFR 1926.451(g)(4)(iv) · Scaffolds, general requirements
 Serious$3,972$2,767Feb 26, 2026Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.451(f)(3)

(3) Scaffolds and scaffold components shall be inspected for visible defects by a competent person before each work shift, and after any occurrence which could affect a scaffold's structural integrity.

29 CFR 1926.451(g)(4)(ii)

(ii) The top edge height of toprails or equivalent member on supported scaffolds manufactured or placed in service after January 1, 2000 shall be installed between 38 inches (0.97 m) and 45 inches (1.2 m) above the platform surface. The top edge height on supported scaffolds manufactured and placed in service before January 1, 2000, and on all suspended scaffolds where both a guardrail and a personal fall arrest system are required shall be between 36 inches (0.9 m) and 45 inches (1.2 m). When conditions warrant, the height of the top edge may exceed the 45-inch height, provided the guardrail system meets all other criteria of paragraph (g)(4).

29 CFR 1926.451(g)(4)(iv)

(iv) When midrails are used, they shall be installed at a height approximately midway between the top edge of the guardrail system and the platform surface.

Other masonry contractors employers in New York

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.