OSHA SearchOSHA records by employer

Leonardo Lopez: OSHA inspections and violations

Ocean City, New Jersey · Framing Contractors · NAICS 238130

1inspections
5citation items
$4,000current penalties
Aug 16, 2017last inspection

OSHA has inspected Leonardo Lopez once in New Jersey.

The inspection began on Aug 16, 2017 as a planned inspection, in Ocean City.

That inspection ended with 5 citation items: 5 serious.

Penalties were first proposed at $6,652 and now stand at $4,000, 40% lower after settlements or reviews.

Scaffolds, general requirements comes up most often in these citations: 2 items under 1926.451.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and Leonardo Lopez averages $4,000 (1 cited inspection).

Leonardo Lopez: OSHA citation items per year, 2017 to 2017
Citation items per year, by inspection date.

New Jersey · latest 90 days of OSHA records

270employers cited

16 of them in the same industry

Get notified the morning OSHA posts each new citation in New Jersey: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in New Jersey

Checking a subcontractor, a client or your own company? Watch Leonardo Lopez and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 342552403 OPENED AUG 16, 2017Closed

Planned · Partial · Safety · 9 employees at the site · Closed Dec 13, 2018

3041 Central Ave, Ocean City, NJ 08226 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1926.451(e)(1) · Scaffolds, general requirements
Serious$3,880$1,228Jan 19, 2018Final
Citation 1, item 1b
29 CFR 1926.451(g)(1) · Scaffolds, general requirements
Serious$0$0Jan 19, 2018Final
Citation 1, item 2a
29 CFR 1926.1053(b)(1) · Ladders in construction
Serious$2,772$2,772Jan 19, 2018Final
Citation 1, item 2b
29 CFR 1926.1053(b)(15) · Ladders in construction
Serious$0$0Jan 19, 2018Final
Citation 1, item 2c
29 CFR 1926.1051(a) · Stairways and Ladders: general requirements
Serious$0$0Jan 19, 2018Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1051 · Stairways and Ladders: general requirements

29 CFR 1926.1051(a)

(a) A stairway or ladder shall be provided at all personnel points of access where there is a break in elevation of 19 inches (48 cm) or more, and no ramp, runway, sloped embankment, or personnel hoist is provided.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.1053(b)(15)

(15) Ladders shall be inspected by a competent person for visible defects on a periodic basis and after any occurrence that could affect their safe use.

29 CFR 1926.451 · Scaffolds, general requirements

Other framing contractors employers in New Jersey

Alert subscribers get notified of each newly cited employer in New Jersey the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.