OSHA inspectors have visited LMMM Houston #77, Ltd in Texas one time.
It opened on Nov 10, 2020 on a referral, in Richmond.
In all, OSHA issued 1 citation item: 1 serious.
The proposed penalties came to $21,026; today they stand at $13,653, 35% less.
Among retail employers, the typical cited inspection since 2015 ends with a $1,750 penalty. LMMM Houston #77, Ltd averages $13,653 across 1 cited inspection.
LMMM Houston #77, Ltd also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
399employers cited
2 of them in the same industry
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
Incident on Nov 4, 2020: Employee's thumb is partially amputated while using bandsaw
At 1:00 p.m. on November 4, 2020, an employee was working at a meat market. It was one store in a local chain. He was a butcher or meat cutter. He was operating a Hobart model 6801 meat saw. This bandsaw was a commercial food-preparing machine that was used to cut various types of both frozen and unfrozen meat. The saw was used every day, 7 days a week, 7 to 8 hours a day. The saw had an adjustable guard that could be raised or lowered to a desired height. In this incident, the employee was using the saw to cut a 1-1/2-foot-long pork loin (1.5 feet, or 0.45 meters). To be cut, the loins were placed on the saw carriage, where they rested against the saw's gauge plate. The employee would then move the carriage from left to right. As the meat went into the saw blade, it was cut, and the employee would use his left hand to remove the cut pieces of meat while returning the plate carrier to the starting position. In this incident, as the employee was cutting the loin, his left thumb contacted the saw blade. His left thumb was partially amputated. He was hospitalized. When interviewed, the employee stated he had adjusted the blade guard to approximately 10 cm (4 in.) above the meat he was cutting. He did not use a tool or other device to measure the distance; he used his eyes to estimate. Another store in this chain was previously cited for a violation of this standard, 29 CFR 1910.212(a)(3)(ii). This was covered in inspection number 1475307, citation number 1, item number 1. According to the employer's rules and procedures, the guard on the saw is required to be lowered to typically 0.5 in. (13 mm) above the meat being cut. Based on a statement from the firm's legal counsel, there was no measuring tool used to ensure that the blade guard was adjusted to the appropriate height. Meat cutters made visual determinations of the gap. Employee interviews showed that the company's 0.5-in. (13-mm) guarding rule was not being effectively communicated to or understood by employees.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2020, the Richmond site logged 2 recordable injuries or illnesses among about 24 workers: 11.0 per 100 full-time workers, against a median of 4.0 for its industry. Those cases cost 29 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
LMMM Houston #77, LTD.
Richmond · 2020
24
2
1
11.0
4.0
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
An employee was using a bandsaw to cut pork chops. The employee's left hand slipped and made contact with the sawblade, which partially amputated the employee's left thumb.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.