OSHA has inspected Loomis Armored U.S., LLC once in New Jersey.
The inspection began on Feb 12, 2020 on a referral, in Pennsauken.
That inspection ended with 4 citation items: 4 serious.
Penalties were first proposed at $37,591 and now stand at $28,190, 25% lower after settlements or reviews.
Belts, pulleys and power-transmission parts comes up most often in these citations: 2 items under 1910.219.
How that compares: the median penalty per cited inspection for staffing, cleaning and waste services employers since 2015 is $2,217, and Loomis Armored U.S., LLC averages $28,190 (1 cited inspection).
Citation items per year, by inspection date.
New Jersey · latest 90 days of OSHA records
276employers cited
Get notified the morning OSHA posts each new citation in New Jersey: the employer, the site address, the rules broken and the penalty.
OSHA records show Loomis Armored U.S., LLC at 2 sites in 2 states. Together they've had 2 inspections and $28,990 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 2 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Feb 11, 2020: Employee amputates two fingertips when caught in conveyor ni
At 11:30 a.m. on February 11, 2020, an employee working as a sales supervisor for an armored car service was troubleshooting a conveyer. The conveyor at the coin packing line was moving too slow and bouncing. The employee caught his left hand in the nip point between the belt and roller pulling off the skin, nail and fingertips. The employee amputated his index and middle fingertips and required medical treatment without hospitalization.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(5)(i)
(5) Protective materials and hardware. (i) Locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware shall be provided by the employer for isolating, securing or blocking of machines or equipment from energy sources.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(d)(1)
(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.
Other armored car services employers in New Jersey
Alert subscribers get notified of each newly cited employer in New Jersey the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.