OSHA SearchOSHA records by employer

Lsas LLC: OSHA inspections and violations

Wilsonville, Oregon · General Automotive Repair · NAICS 811111

1inspections
7citation items
$200current penalties
May 15, 2017last inspection

OSHA inspectors have visited Lsas LLC in Oregon one time.

It opened on May 15, 2017 as a planned inspection, in Wilsonville.

In all, OSHA issued 7 citation items: 3 serious and 4 other-than-serious.

The penalties, $200 in total, stand where OSHA first set them.

The rule cited most here is 1910.215 (grinders and abrasive wheels), 2 times.

Among repair and personal services employers, the typical cited inspection since 2015 ends with a $1,200 penalty. Lsas LLC averages $200 across 1 cited inspection.

Lsas LLC: OSHA citation items per year, 2017 to 2017
Citation items per year, by inspection date.

Want to know if OSHA cites Lsas LLC again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 342326006 OPENED MAY 15, 2017Closed

Planned · Complete · Health · 6 employees at the site · Closed Oct 12, 2017

30775 Sw Boones Ferry Rd Ste D, Wilsonville, OR 97070 · General Automotive Repair · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
 Serious$100$100Jun 5, 2017Final
Citation 1, item 1b
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
 Serious$0$0Jun 5, 2017Final
Citation 1, item 2
29 CFR 1910.242(b) · Hand and power tools
 Serious$100$100Jun 5, 2017Final
Citation 2, item 3
29 CFR OAR 437-002-0187(2)-5
 Other-than-serious$0$0Jun 5, 2017Final
Citation 2, item 4
29 CFR 1910.303(g)(1)(ii) · Electrical equipment, general requirements
 Other-than-serious$0$0Jun 5, 2017Final
Citation 2, item 5
29 CFR OAR 437-001-0765(11)-3
 Other-than-serious$0$0Jun 5, 2017Final
Citation 2, item 6
29 CFR 1910.134(k)(6) · Respiratory protection
 Other-than-serious$0$0Jun 5, 2017Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.134 · Respiratory protection

29 CFR 1910.134(k)(6)

(6) The basic advisory information on respirators, as presented in appendix D of this section, shall be provided by the employer in any written or oral format, to employees who wear respirators when such use is not required by this section or by the employer.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(a)(4)

(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.

29 CFR 1910.215(b)(9)

(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)

29 CFR 1910.242 · Hand and power tools

29 CFR 1910.303 · Electrical equipment, general requirements

Other general automotive repair employers in Oregon

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.