OSHA SearchOSHA records by employer

M & M Extendo, LLC: OSHA inspections and violations

Caldwell, Idaho · Fabricated Structural Metal Manufacturing · NAICS 332312

2inspections
3citation items
$3,168current penalties
Mar 17, 2020last inspection

OSHA has inspected M & M Extendo, LLC 2 times in Idaho since 2012.

The latest one began on Mar 17, 2020 after a complaint, in Boise.

Those inspections ended with 3 citation items: 2 serious and 1 other-than-serious.

Penalties were first proposed at $6,882 and now stand at $3,168, 54% lower after settlements or reviews.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and M & M Extendo, LLC averages $3,168 (1 cited inspection).

It reported 1 severe injury to OSHA since 2015.

M & M Extendo, LLC: OSHA citation items per year, 2012 to 2020
Citation items per year, by inspection date.

Idaho · latest 90 days of OSHA records

62employers cited

Get notified the morning OSHA posts each new citation in Idaho: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Idaho

Checking a subcontractor, a client or your own company? Watch M & M Extendo, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344702105 OPENED MAR 17, 2020Closed

Complaint · Partial · Safety · 26 employees at the site · Closed Aug 24, 2021

4242 South Eagleson Road, Boise, ID 83705 · Used Car Dealers · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.212(a)(1) · Machine guarding
Serious$5,735$2,868Mar 31, 2020Final
Citation 1, item 1b
29 CFR 1910.213(i)(1) · Woodworking machinery
Serious$0$0Mar 31, 2020Final
Citation 2, item 1
29 CFR 1904.29(a) · Injury and illness log
Other-than-serious$1,147$300Mar 31, 2020Final

Inspection 334652997 OPENED JUN 7, 2012Closed

Planned · Partial · Safety · 19 employees at the site · Closed Jul 24, 2012

223 Roedel Ave, Caldwell, ID 83605 · Fabricated Structural Metal Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Dec 11, 2019, Boise: Hospitalization · cuts, lacerations · finger(s), fingernail(s), unspecified

An employee was cutting 2X4 lumber with a miter saw when his hand slipped and contacted the blade, lacerating his left index, middle, and ring fingers.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.29 · Injury and illness log

29 CFR 1904.29(a)

(a) Basic requirement. You must use OSHA 300, 300-A, and 301 forms, or equivalent forms, for recordable injuries and illnesses. The OSHA 300 form is called the Log of Work-Related Injuries and Illnesses, the 300-A is the Summary of Work-Related Injuries and Illnesses, and the OSHA 301 form is called the Injury and Illness Incident Report.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(i)(1)

(i) Bandsaws and band resaws. (1) All portions of the saw blade shall be enclosed or guarded, except for the working portion of the blade between the bottom of the guide rolls and the table. Bandsaw wheels shall be fully encased. The outside periphery of the enclosure shall be solid. The front and back of the band wheels shall be either enclosed by solid material or by wire mesh or perforated metal. Such mesh or perforated metal shall be not less than 0.037 inch (U.S. Gage No. 20), and the openings shall be not greater than three-eighths inch. Solid material used for this purpose shall be of an equivalent strength and firmness. The guard for the portion of the blade between the sliding guide and the upper-saw-wheel guard shall protect the saw blade at the front and outer side. This portion of the guard shall be self-adjusting to raise and lower with the guide. The upper-wheel guard shall

Other fabricated structural metal manufacturing employers in Idaho

Alert subscribers get notified of each newly cited employer in Idaho the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.