San Antonio, Texas · All Other Miscellaneous Fabricated Metal Product Manufacturing · NAICS 332999
16inspections
15citation items
$27,401current penalties
Jul 23, 2025last inspection
OSHA has inspected M&M Metals 16 times in Texas since 1975.
The latest one began on Jul 23, 2025 on a referral, in San Antonio.
Those inspections ended with 15 citation items: 15 other-than-serious.
Penalties were first proposed at $45,560 and now stand at $27,401, 40% lower after settlements or reviews.
Introduction comes up most often in these citations: 2 items under 1926.400.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and M&M Metals averages $8,800 (3 cited inspections).
M&M Metals also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
393employers cited
4 of them in the same industry
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the San Antonio site logged 5 recordable injuries or illnesses among about 84 workers: 6.0 per 100 full-time workers, against a median of 3.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
M&M Metals Inc.
San Antonio · 2025
84
5
0
6.0
3.6
M&M Metals
San Antonio · 2024
70
7
1
10.0
3.6
Included with any plan: 1 more yearly log from these sites, back to 2020, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Feb 19, 2016, San Antonio: Hospitalization · cuts, lacerations · hand(s), unspecified
An employee was installing a metal HVAC duct. As the duct was being lifted, the rigging failed, causing the duct to drop. The employee attempted to catch the duct as it fell, and his right hand was lacerated. He was hospitalized.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1904.2 · Partial exemption for establishments in certain industries
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(1)
(d) Hazard assessment and equipment selection. (1) The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). If such hazards are present, or likely to be present, the employer shall:
(1) General. The employer shall provide a medical evaluation to determine the employee's ability to use a respirator, before the employee is fit tested or required to use the respirator in the workplace. The employer may discontinue an employee's medical evaluations when the employee is no longer required to use a respirator.
29 CFR 1910.134(k)(6)
(6) The basic advisory information on respirators, as presented in appendix D of this section, shall be provided by the employer in any written or oral format, to employees who wear respirators when such use is not required by this section or by the employer.
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.