Since 2019, OSHA inspectors have visited Mac LTT Manufacturing, Inc. in Montana 2 times.
The most recent inspection opened on Oct 10, 2024 on a referral, in Billings.
In all, OSHA issued 5 citation items: 3 serious and 2 other-than-serious.
The proposed penalties came to $18,300; today they stand at $10,072, 45% less.
The rule cited most here is 1910.212 (machine guarding), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Mac LTT Manufacturing, Inc. averages $5,036 across 2 cited inspections.
Mac LTT Manufacturing, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Montana · latest 90 days of OSHA records
27employers cited
Get notified the morning OSHA posts each new citation in Montana: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Mac LTT Manufacturing, Inc. and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Billings site logged 3 recordable injuries or illnesses among about 88 workers: 3.4 per 100 full-time workers, against a median of 5.2 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
MAC LTT Manufacturing, Inc.
Billings · 2025
88
3
0
3.4
5.2
Included with any plan: 9 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Oct 1, 2024, Billings: Amputation · amputations involving bone loss · other finger(s) n.e.c.
An employee was using a brake press when their right middle and ring fingers became caught between the material and the upper die on the press. The employee sustained medical amputations of both fingers at the upper knuckle.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.212(a)(3)(ii)
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
29 CFR 1910.29 · Fall protection systems in general industry
Alert subscribers get notified of each newly cited employer in Montana the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.