OSHA SearchOSHA records by employer

Mansfield Engineered Components, Inc.: OSHA inspections and violations

Mansfield, Ohio · Hardware Manufacturing · NAICS 332510

1inspections
3citation items
$6,526current penalties
Nov 9, 2021last inspection

OSHA inspectors have visited Mansfield Engineered Components, Inc. in Ohio one time.

It opened on Nov 9, 2021 on a referral, in Mansfield.

In all, OSHA issued 3 citation items: 2 serious and 1 other-than-serious.

The proposed penalties came to $13,052; today they stand at $6,526, 50% less.

The rule cited most here is 1910.147 (lockout/tagout), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Mansfield Engineered Components, Inc. averages $6,526 across 1 cited inspection.

Mansfield Engineered Components, Inc. also files yearly injury logs with OSHA, summarized below.

It reported 1 severe injury to OSHA since 2015.

Mansfield Engineered Components, Inc.: OSHA citation items per year, 2021 to 2021
Citation items per year, by inspection date.

Want to know if OSHA cites Mansfield Engineered Components, Inc. again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 345629778 OPENED NOV 9, 2021Closed

Referral · Partial · Safety · 220 employees at the site · Closed Nov 1, 2022

1776 Harrington Memorial Rd., Mansfield, OH 44903 · Hardware Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Nov 1, 2021: Employee amputates fingertip unjamming energized riveter

At 11:00 p.m. on November 1, 2021, an employee was operating an #R-28 Milford Rivet & Machine Co. Model S413 Riveter on an assembly line when the machine jammed. The operator opened a guard over the flywheel to access the solenoid mechanism which is used to unjam the rivets in the machine. The employee did not shutdown the machine, wait for the residual energy of the flywheel to dissipate, or unplug the equipment. The employee caught his glove in the belt and his right index finger was drawn into the nip point between belt and flywheel pulley. The employee amputated his index finger and fractured his middle finger, requiring medical treatment without hospitalization. There were no witnesses to the incident.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.147(c)(7)(i) · Lockout/tagout
Serious$13,052$6,526Jan 28, 2022Final
Citation 1, item 1b
29 CFR 1910.147(d) · Lockout/tagout
Serious$0$0Jan 28, 2022Final
Citation 2, item 1 Other-than-serious$0$0Jan 28, 2022Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2025, the Mansfield site logged 3 recordable injuries or illnesses among about 185 workers: 1.8 per 100 full-time workers, against a median of 2.7 for its industry. Those cases cost 43 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
Mansfield Engineered Components
Mansfield · 2025
185 311.82.7
Mansfield Engineered Components Inc.
Mansfield · 2022
224 411.92.7

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Nov 1, 2021, Mansfield: Amputation · amputations · fingertip(s)

On November 1, 2021, an employee was attempting clear a jam in a riveter when his right middle finger became caught in the machine. The employee's right middle fingertip was amputated and his right ring finger was crushed.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(ii)(b)

(B) Specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy;

29 CFR 1910.147(c)(7)(i)

(7) Training and communication. (i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:

29 CFR 1910.147(d)

(d) Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence:

Other hardware manufacturing employers in Ohio

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.