OSHA SearchOSHA records by employer

Marmon Utility, LLC: OSHA inspections and violations

Milford, New Hampshire · Copper Rolling, Drawing, Extruding, and Alloying · NAICS 331420

2inspections
2citation items
$12,940current penalties
Dec 14, 2023last inspection

Since 2019, OSHA inspectors have visited Marmon Utility, LLC in New Hampshire 2 times.

The most recent inspection opened on Dec 14, 2023 as a planned inspection, in Amherst.

In all, OSHA issued 2 citation items: 2 serious.

The proposed penalties came to $17,063; today they stand at $12,940, 24% less.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Marmon Utility, LLC averages $6,470 across 2 cited inspections.

Marmon Utility, LLC also files yearly injury logs with OSHA, summarized below.

It reported 2 severe injuries to OSHA since 2015.

Marmon Utility, LLC: OSHA citation items per year, 2019 to 2023
Citation items per year, by inspection date.

New Hampshire · latest 90 days of OSHA records

53employers cited

Get notified the morning OSHA posts each new citation in New Hampshire: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in New Hampshire

Checking a subcontractor, a client or your own company? Watch Marmon Utility, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 347165045 OPENED DEC 14, 2023Closed

Planned · Complete · Safety · 30 employees at the site · Closed Feb 23, 2024

116 New Hampshire 101a, Amherst, NH 03031 · All Other Plastics Product Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.219(h)(1) · Belts, pulleys and power-transmission parts
Serious$3,803$2,940Jan 25, 2024Final

Inspection 343854014 OPENED MAR 13, 2019Closed

Referral · Partial · Safety · 100 employees at the site · Closed Aug 19, 2019

53 Old Wilton Road, Milford, NH 03055 · Copper Rolling, Drawing, Extruding, and Alloying · OSHA's record · Phone and website on Google Maps

Incident on Mar 8, 2019: Employee amputates two fingertips when caught by unguarded c

At 5:15 a.m. on March 8, 2019, an employee was preparing to butt weld a cable and caught two fingers in an unguarded clamp. The employee amputated his fingertips and was hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(1) · Machine guarding
Serious$13,260$10,000Jun 28, 2019Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2025, the Milford site logged 2 recordable injuries or illnesses among about 176 workers: 1.1 per 100 full-time workers, against a median of 1.5 for its industry.

Site and yearWorkersCasesDays-away casesRateIndustry median
Marmon Utility - Milford
Milford · 2025
176 201.11.5
Marmon Utility - Amherst
Amherst · 2025
40 000.02.1
Marmon Utility LLC Milford
Milford · 2024
176 512.71.5
Marmon Utility LLC Amherst
Amherst · 2024
39 000.02.6

Included with any plan: 16 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.

See plans

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.

Aug 20, 2021, Milford: Hospitalization · fractures · foot (feet), unspecified

A forklift was being used to remove a 1,500-lbs. pad of copper tape from a pallet. The pad fell and landed on the injured employee's left foot, breaking it.

Mar 8, 2019, Milford: Amputation · amputations · fingertip(s)

An employee was setting up the butt welder to weld a cable. The employee's right hand was in the point of operation when the butt welder clamp activated, amputating two fingertips.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(h)(1)

(h) Keys, setscrews, and other projections. (1) All projecting keys, setscrews, and other projections in revolving parts shall be removed or made flush or guarded by metal cover. This subparagraph does not apply to keys or setscrews within gear or sprocket casings or other enclosures, nor to keys, setscrews, or oilcups in hubs of pulleys less than twenty (20) inches in diameter where they are within the plane of the rim of the pulley.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.