OSHA inspectors have visited Masonite Corporation in North Dakota one time.
It opened on Nov 18, 2021 on a referral, in Wahpeton.
In all, OSHA issued 1 citation item: 1 serious.
The penalties, $14,502 in total, stand where OSHA first set them.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Masonite Corporation averages $14,502 across 1 cited inspection.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
North Dakota · latest 90 days of OSHA records
30employers cited
Get notified the morning OSHA posts each new citation in North Dakota: the employer, the site address, the rules broken and the penalty.
OSHA records show Masonite Corporation at 22 sites in 11 states. Together they've had 73 inspections and $123,001 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 22 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Nov 12, 2021: Worker loses finger while working on energized machinery
At 11:00 a.m. on November 12, 2021, an employee was working for a firm that manufactured windows and doors. He was the production lead, and he operated a fabricating machine. He was assisting a shift supervisor. The shift supervisor was performing maintenance on a picker bin infeed conveyor system auger drive belt. The machinery had clogged. The shift supervisor had removed the guard for the drive belt. As the guard had a solid metal face, the rotation of the drive mechanism could be viewed only through the gap between the motor and guard. With the guard removed, the shift supervisor and the employee could see if the belt driven auger had stopped moving. The employee was working at the backside of the equipment. He had to pass between the unprotected drive pulleys of the auger conveyor to access the service disconnect for the drive motor. The distance he and the supervisor were passing through between the safety rail for the work platform to the pulleys' drive mechanism was approximately 15 inches (380 mm). With the equipment not locked out and still energized, the employee opened the access cover. He was clearing material from between the airlock and the auger conveyor. He was removing the material by hand and by poking at the material with a tool. The shift supervisor was jogging the auger on and off. He stated that he was unaware that the guard had been removed or that the access door was open. He added that he knew that the process to remove the packed in material was to open the access cover and pull material out. He knew that the employee had tools that he was using to stick into the opening and push material down. The employee was reaching in with a tool to push material down. The middle finger on his right hand became caught in the drive belt. His finger was amputated. He was treated without hospitalization.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
Other wood window and door manufacturing employers in North Dakota
Alert subscribers get notified of each newly cited employer in North Dakota the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.