Master Craft Engineering, Inc. has 2 OSHA inspections on record in Georgia, the first in 1996.
OSHA's last visit started on Dec 1, 2022 as a planned inspection, in Tifton.
Across those inspections OSHA issued 9 citation items: 5 serious and 4 other-than-serious.
OSHA proposed $17,365 in penalties. After settlements and reviews the total is $10,850, down 38%.
Most often, OSHA cited 1910.134, respiratory protection (4 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Master Craft Engineering, Inc. averages $9,800 over 1 cited inspection in that time.
Master Craft Engineering, Inc. also files yearly injury logs with OSHA, summarized below.
Want to know if OSHA cites Master Craft Engineering, Inc. again? Add it to a watchlist and we will email you the morning the citation shows up.
Watch this company323 Southwell Boulevard, Tifton, GA 31794 · Metal Crown, Closure, and Other Metal Stamping (except Automotive) · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 29 CFR 1910.212(a)(1) · Machine guarding |
Serious | $6,164 | $3,700 | Dec 28, 2022 | Final |
| Citation 1, item 2 29 CFR 1910.217(c)(1)(i) · Mechanical power presses |
Serious | $10,151 | $6,100 | Dec 28, 2022 | Final |
Southwell Blvd., Rt.2, Box 573, Tifton, GA 31794 · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 29 CFR 1910.212(a)(1) · Machine guarding |
Serious | $525 | $525 | Aug 2, 1996 | Closed |
| Citation 1, item 2a 29 CFR 1910.215(a)(4) · Grinders and abrasive wheels |
Serious | $525 | $525 | Aug 2, 1996 | Closed |
| Citation 1, item 2b 29 CFR 1910.215(b)(9) · Grinders and abrasive wheels |
Serious | $0 | $0 | Aug 2, 1996 | Closed |
| Citation 2, item 1a 29 CFR 1910.134(a)(2) · Respiratory protection |
Other-than-serious | $0 | $0 | Aug 2, 1996 | Closed |
| Citation 2, item 1b 29 CFR 1910.134(b)(3) · Respiratory protection |
Other-than-serious | $0 | $0 | Aug 2, 1996 | Closed |
| Citation 2, item 1c 29 CFR 1910.134(b)(10) · Respiratory protection |
Other-than-serious | $0 | $0 | Aug 2, 1996 | Closed |
| Citation 2, item 1d 29 CFR 1910.134(e)(5) · Respiratory protection |
Other-than-serious | $0 | $0 | Aug 2, 1996 | Closed |
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2020, the Tifton site logged 0 recordable injuries or illnesses among about 48 workers: 0.0 per 100 full-time workers, against a median of 4.0 for its industry.
| Site and year | Workers | Cases | Days-away cases | Rate | Industry median |
|---|---|---|---|---|---|
| Master Craft Engineering, Inc. Tifton · 2020 | 48 | 0 | 0 | 0.0 | 4.0 |
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.134(a)(2)
(2) The CNP system defaults selected for test pressure shall be set at −15 mm of water (-0.58 inches of water) and the modeled inspiratory flow rate shall be 53.8 liters per minute for performing fit tests.
29 CFR 1910.134(b)(10)
(10) Filters used for quantitative fit testing shall be replaced whenever increased breathing resistance is encountered, or when the test agent has altered the integrity of the filter media.
29 CFR 1910.134(b)(3)
(3) Turning head side to side. Standing in place, the subject shall slowly turn his or her head from side to side between the extreme positions on each side for 1 minute. The head shall be held at each extreme momentarily so the subject can inhale at each side. After the turning head side to side exercise, the subject needs to hold head full left and hold his or her breath for 10 seconds during test measurement. Next, the subject needs to hold head full right and hold his or her breath for 10 seconds during test measurement.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.