Matich Corporation: OSHA inspections and violations
Redlands, California · Construction Sand and Gravel Mining · NAICS 212321
31inspections
26citation items
$51,470current penalties
Apr 23, 2026last inspection
Since 1988, OSHA inspectors have visited Matich Corporation in California 31 times.
The most recent inspection opened on Apr 23, 2026 as a planned inspection, in Cabazon.
In all, OSHA issued 26 citation items: 6 serious and 20 other-than-serious.
The proposed penalties came to $88,570; today they stand at $51,470, 42% less.
Among mining and oil and gas employers, the typical cited inspection since 2015 ends with a $2,880 penalty. Matich Corporation averages $6,176 across 4 cited inspections.
4 inspections on this page followed a fatal incident.
Matich Corporation also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
California · latest 90 days of OSHA records
1,117employers cited
10 of them in the same industry
Get notified the morning OSHA posts each new citation in California: the employer, the site address, the rules broken and the penalty.
Incident on Nov 17, 2020 (fatal): Employee is struck and killed when hauling vehicle backs up
At 1:38 p.m. on November 17, 2020, Employee #1 and a coworker were engaged in a street repaving. Employee #1 was walking a pavement compactor from one location along the street to another. The coworker was operating a Peterbilt Material Hauling Vehicle, Model 3-220. As the coworker backed up the truck, the truck ran over Employee #1. Employee #1 sustained blunt force traumatic injuries and was killed.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 1592(A)
Other-than-serious
$9,000
$0
May 15, 2021
Final
Citation 2, item 1
29 CFR 1592(E)
Serious
$22,500
$22,500
May 15, 2021
Final
Inspection 344962337 OPENED OCT 6, 2020Closed
Planned · Complete · Safety · 4 employees at the site · Closed Oct 13, 2020
Incident on Sep 26, 2011: Employee is burned in flash fire
At approximately 5:45 a.m. on September 26, 2011, Employee #1 was using a propan e heating torch to free a stuck valve containing cold asphalt at an asphalt hot mix plant. A tank containing approximately 25 tons of hot PG64-10 asphalt oil wa s located approximately 4 to 6 in. from the valve. The tank's head space contain ed flammable vapors and its lid was not tightly sealed. When a flash fire occurr ed, Employee #1 was burned over approximately 14.5 percent of his body. He was h ospitalized for treatment. An observer standing approximately 10 ft away sustain ed first-degree burns on his face, right hand and stomach. The employer had not performed a hazard assessment for the hot mix plant. Training consisted of what was shown to employees by senior employees. The injury line only included one em ployee.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 5157 C02
Other-than-serious
$425
$425
Jan 9, 2012
Final
Citation 1, item 2
29 CFR 4845 Q
Other-than-serious
$635
$635
Jan 9, 2012
Final
Citation 2, item 1
29 CFR 5603
Serious
$18,000
$10,000
Jan 18, 2012
Final
Inspection 313509150 OPENED JUN 23, 2010Closed
Planned · Partial · Safety · 15 employees at the site · Closed Jul 8, 2010
Incident on Jan 6, 2009 (fatal): Employee is struck by steel beam. later dies
At approximately 2:29 p.m. on January 6, 2009, a conveyor support structure in a sand and gravel pit was being dismantled for relocation to another area. A 12-f oot long steel beam was being torch cut from the structure off a man-lift positi oned approximately 20-feet above ground level. An employee was operating a Case skidsteer loader under the support structure cleaning the concrete footing. He w as to be warned when the beam was to drop. As the Case skidsteer moved forward t o pick up some material, the beam dropped unexpectedly to the ground, falling ov er in front of the advancing skidsteer, underneath the ROPS, striking the employ ee in the head and abdomen, killing him. The employee died from the injuries on January 9, 2009 at approximately 1:38 a.m. The root cause of this accident was a failure by management to have a qualified person make a survey of the structure to determine the possibility of an unplanned collapse prior to the start of the demolition.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 342 A
Other-than-serious
$5,000
$1,100
Apr 9, 2009
Final
Citation 2, item 1
29 CFR 1734 B01
Serious
$18,000
$7,000
Apr 9, 2009
Final
Inspection 311666176 OPENED JUN 20, 2008Closed
Planned · Complete · Safety · 5 employees at the site · Closed Aug 12, 2008
Incident on Apr 27, 2007: Concrete worker amputates thumb on portable circular saw
On April 27 2007, Employee #1 was working as concrete and terrazzo finisher for a concrete work contractor at a complex in San Bernardino, California. The repor ted SIC, 1611, is that of a highway construction contractor (that might be mista ken). Employee #1 was an employee of his employer, and he had worked for his emp loyer for 11 months. He had been at this jobsite for 3 days. On the day of the i ncident, his job was to pour concrete foundation and walls, and at the time of h is injury, he was cutting a piece of wood that was 20 inches long and 3.5 inches wide. He was using a company-provided power saw such as a Skilsaw to cut wood l engthwise and to a width of one inch. He was using a short stack of wood to supp ort the pieces he was cutting, and he was bending over as he cut the pieces, whi ch were to be used as stakes. He was holding the power saw in his right hand and the piece being cut in his left hand, when the saw kicked back. The blade struc k his left thumb, amputating it. Employee #1 was transported to the Saint Bernar dine Medical Center, where he was treated and released. He was not hospitalized. At the time of his injury, he was wearing an orange vest, a hard hat, goggles a nd work shoes, but not steel-toe safety shoes. He had inspected the power saw be fore he used it and did not note any defects. When interviewed, he stated he was shown an English-language version of an "Employee Safety Handbook," by Lupe Cal deron, but that he had not seen this handbook before the accident. The handbook contained an employee acknowledgement form. Training documentation for Employee #1 was requested from the employer, but the employer was unable to provide any a cknowledgement form signed by Employee #1. Employee #1 stated that at the time o f injury, he was doing this job the way he had been taught by his supervisor.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 1509 A
Other-than-serious
$185
$185
Sep 18, 2007
Closed
Inspection 303590707 OPENED APR 6, 2007Closed
Planned · Complete · Safety · 6 employees at the site · Closed Apr 10, 2007
Incident on Jun 15, 1998: Employee's arm fractured by falling sheet metal plate
Employee #1 was assigned to replace flats on an inclined conveyor. The sheet met al covers on the top of the conveyor had been removed and tied to the handrails of a nearby stairway. Employee #1 was working on the conveyor from below when on e 40 in. plate became dislodged and bounced down the stairs. It struck his right arm, fracturing and lacerating it above and below the elbow. He was transported to Redlands Community Hospital, where he underwent surgery to insert pins in th e bones of his arm.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3273 F
Serious
$5,000
$5,000
Dec 17, 1998
Final
Inspection 119898674 OPENED JUL 24, 1996Closed
Planned · Complete · Safety · 4 employees at the site · Closed Jul 31, 1996
Incident on Oct 1, 1993 (fatal): Employee killed when run over by grader
At approximately 8:30 a.m. on October 1, 1993, Employee #1 was assigned to help a grader operator backfill an area next to a newly constructed roadway. Employee #1 was watching the end of the grader blade to ensure that it did not damage th e new asphalt or other objects that had been installed at the roadside. This ass ignment, called a "guinea hopper," requires the employee to walk near the end of the blade with a shovel and fill in depressions, and to guide the operator who is driving the grader. There was other equipment working in the area at the same time. A "sidewinder" and hauling trucks were on the same side of the road going in the opposite direction putting dirt on the berm next to the curb. The grader operator decided to turn around and work the area behind the sidewinder. The gr ader operator stopped to check traffic to the rear of the grader before turning into the roadway, and signaled for the guinea hopper to get on the equipment. Th e grader operator then looked to his left to check traffic, looked to his right, saw Employee #1 climbing onto the grader, looked back to his left to check for traffic, and then started out. Employee #1 was run over and killed by the grader 's tandem wheels.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3664 B
Other-than-serious
$5,000
$0
Nov 24, 1993
Final
Inspection 120058326 OPENED NOV 10, 1992Closed
Accident · Partial · Safety · 5 employees at the site · Closed Nov 20, 1992
Incident on Sep 2, 1992: Employee struck in eye by winch handle when ratchet releases
At approximately 12:23 p.m. on September 2, 1992, Employee #1 was using a come-a long or manual winch to tie down a load on a vehicle. The ratchet released and t he handle of the winch struck Employee #1 in the left eye. Employee #1 was taken by paramedic ambulance to Simi Adventist Hospital, administered first aid, and released.
No citations from this inspection.
Inspection 106263791 OPENED OCT 13, 1988Closed
Accident · Partial · Safety · 15 employees at the site · Closed Jul 28, 1989
Incident on Oct 13, 1988 (fatal): Employee killed when run over by scraper
Employee #1 was working as a grade checker on a road construction project. An ex isting two lane roadway was being widened to four lanes. A Caterpillar 623B scra per and a Caterpillar 140 blade (road grader) were grading the two new lanes. Em ployee #1 stepped over a 2 ft beam into the path of a backing scraper and turned his back to the scraper to help. The operator of the blade was directing the sc raper operator to back up. The blade operator realized that Employee #1 did not hear the scraper, which did not have an operating back-up alarm, and signaled th e scraper operator to stop. But the scraper had already struck Employee #1 by th e time the scraper operator reacted. Employee #1 was run over and killed.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the San Bernardino site logged 4 recordable injuries or illnesses among about 205 workers: 2.8 per 100 full-time workers, against a median of 2.2 for its industry. Those cases cost 148 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Matich Corporation
San Bernardino · 2025
205
4
3
2.8
2.2
Included with any plan: 4 more yearly logs from these sites, back to 2021, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(ii) No employer shall permit earthmoving or compacting equipment which has an obstructed view to the rear to be used in reverse gear unless the equipment has in operation a reverse signal alarm distinguishable from the surrounding noise level or an employee signals that it is safe to do so.
Alert subscribers get notified of each newly cited employer in California the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.