OSHA SearchOSHA records by employer

Medrano Construction LLC: OSHA inspections and violations

Braselton, Georgia · Framing Contractors · NAICS 238130

2inspections
6citation items
$35,072current penalties
Feb 2, 2022last inspection

Since 2017, OSHA inspectors have visited Medrano Construction LLC in Georgia 2 times.

The most recent inspection opened on Feb 2, 2022 as a planned inspection, in Marietta.

In all, OSHA issued 6 citation items: 3 serious and 3 repeat.

The proposed penalties came to $45,530; today they stand at $35,072, 23% less.

The rule cited most here is 1926.501 (fall protection in construction), 2 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Medrano Construction LLC averages $17,536 across 2 cited inspections.

Medrano Construction LLC: OSHA citation items per year, 2017 to 2022
Citation items per year, by inspection date.

Georgia · latest 90 days of OSHA records

138employers cited

26 of them in the same industry

Get notified the morning OSHA posts each new citation in Georgia: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Georgia

Checking a subcontractor, a client or your own company? Watch Medrano Construction LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345774491 OPENED FEB 2, 2022Closed

Planned · Partial · Safety · 5 employees at the site · Closed Jan 6, 2026

(lot #126) 1825 Toccata Lane, Marietta, GA 30067 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.304(d) · Woodworking tools
 Serious$3,419$3,419Mar 9, 2022Final
Citation 1, item 2
29 CFR 1926.1053(b)(1) · Ladders in construction
 Serious$4,102$4,102Mar 9, 2022Final
Citation 2, item 1
29 CFR 1926.501(b)(13) · Fall protection in construction
 Repeat$17,094$17,094Mar 9, 2022Final

Inspection 342583994 OPENED AUG 24, 2017Closed

Planned · Partial · Safety · 8 employees at the site · Closed Jan 20, 2023

431 Meadow Lake Terrace, Braselton, GA 30517 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.503(a)(2) · Fall protection training in construction
 Serious$4,183$2,092Dec 11, 2017Final
Citation 2, item 1
29 CFR 1926.102(a)(1) · Eye and face protection in construction
 Repeat$8,366$4,183Dec 11, 2017Final
Citation 2, item 2
29 CFR 1926.501(b)(13) · Fall protection in construction
 Repeat$8,366$4,183Dec 11, 2017Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.102 · Eye and face protection in construction

29 CFR 1926.102(a)(1)

(a) General. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.304 · Woodworking tools

29 CFR 1926.304(d)

(d) Guarding. All portable, power-driven circular saws shall be equipped with guards above and below the base plate or shoe. The upper guard shall cover the saw to the depth of the teeth, except for the minimum arc required to permit the base to be tilted for bevel cuts. The lower guard shall cover the saw to the depth of the teeth, except for the minimum arc required to allow proper retraction and contact with the work. When the tool is withdrawn from the work, the lower guard shall automatically and instantly return to the covering position.

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.503 · Fall protection training in construction

Other framing contractors employers in Georgia

Alert subscribers get notified of each newly cited employer in Georgia the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.