OSHA SearchOSHA records by employer

Mega Granite & Marble, Inc: OSHA inspections and violations

Newnan, Georgia · Cut Stone and Stone Product Manufacturing · NAICS 327991

2inspections
4citation items
$32,346current penalties
Jul 20, 2023last inspection

Since 2017, OSHA inspectors have visited Mega Granite & Marble, Inc in Georgia 2 times.

The most recent inspection opened on Jul 20, 2023 after a complaint, in Newnan.

In all, OSHA issued 4 citation items: 3 serious and 1 other-than-serious.

The proposed penalties came to $46,208; today they stand at $32,346, 30% less.

The rule cited most here is 1910.147 (lockout/tagout), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Mega Granite & Marble, Inc averages $32,346 across 1 cited inspection.

It reported 1 severe injury to OSHA since 2015.

Mega Granite & Marble, Inc: OSHA citation items per year, 2017 to 2023
Citation items per year, by inspection date.

Georgia · latest 90 days of OSHA records

147employers cited

Get notified the morning OSHA posts each new citation in Georgia: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Georgia

Checking a subcontractor, a client or your own company? Watch Mega Granite & Marble, Inc and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 346857691 OPENED JUL 20, 2023Closed

Complaint · Partial · Safety · 60 employees at the site · Closed Oct 15, 2026

360 Millard Farmer Industrial Blvd., Newnan, GA 30263 · Cut Stone and Stone Product Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.133(a)(1) · Eye and face protection
Other-than-serious$10,046$7,032Dec 6, 2023Final
Citation 1, item 2
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
Serious$14,063$9,844Dec 6, 2023Final
Citation 1, item 3
29 CFR 1910.147(c)(7)(i)(a) · Lockout/tagout
Serious$8,036$5,625Dec 6, 2023Final
Citation 1, item 4
29 CFR 1910.212(a)(3)(ii) · Machine guarding
Serious$14,063$9,844Dec 6, 2023Final

Inspection 342329901 OPENED MAY 16, 2017Closed

Complaint · Partial · Safety · 122 employees at the site · Closed Jul 10, 2017

360 Millard Farmer Industrial Blvd., Newnan, GA 30263 · Cut Stone and Stone Product Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Mar 25, 2016, Newnan: Hospitalization · soreness, pain, hurt-nonspecified injury · multiple trunk locations

An employee was performing maintenance on a CNC waterjet cutting machine by replacing the high pressure line. When he was testing the pressurized line, the fitting failed or broke causing the water to be released at a very high rate. It struck the employee in the chest and exited his back. The employee was standing approximately 15 ft. away from the machine.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.133 · Eye and face protection

29 CFR 1910.133(a)(1)

(a) General requirements. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(i)

(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.

29 CFR 1910.147(c)(7)(i)(a)

(A) Each authorized employee shall receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control.

29 CFR 1910.212 · Machine guarding

Other cut stone and stone product manufacturing employers in Georgia

Alert subscribers get notified of each newly cited employer in Georgia the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.