Metal Design Systems Inc: OSHA inspections and violations
Cedar Rapids, Iowa · All Other Miscellaneous Fabricated Metal Product Manufacturing · NAICS 332999
2inspections
4citation items
$7,700current penalties
Nov 26, 2019last inspection
Since 2019, OSHA inspectors have visited Metal Design Systems Inc in Iowa 2 times.
The most recent inspection opened on Nov 26, 2019 on a referral, in Cedar Rapids.
In all, OSHA issued 4 citation items: 3 serious and 1 other-than-serious.
The proposed penalties came to $13,057; today they stand at $7,700, 41% less.
The rule cited most here is 1910.212 (machine guarding), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Metal Design Systems Inc averages $3,850 across 2 cited inspections.
Metal Design Systems Inc also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Iowa · latest 90 days of OSHA records
66employers cited
Get notified the morning OSHA posts each new citation in Iowa: the employer, the site address, the rules broken and the penalty.
Incident on Nov 21, 2019: Employee cuts finger on metal, is later amputated
At 6:30 a.m. on November 21, 2019, an employee working as an assembler for a metal fabrication products manufacturer was using a table saw. The employee was cutting a 1/8th inch strip off of a piece of aluminum stock. While cutting the aluminum, the employee was creating a long metal chip. The employee struck the chip with his hand causing a severe cut to a finger. The employee required medical treatment without hospitalization. The finger had to be surgically amputated.
Incident on Jun 25, 2019: Employee amputates fingertip when unguarded saw kicks back
At 10:30 a.m. on June 25, 2019, an employee was using a Bosch 4100 10 inch table saw to cut a groove in a 4 inch wide by 11 inch long by 1 inch thick block of plastic material. There was no guarding in place on the saw blade. As the employee made the cut, the blade pinched in the saw kerf and the block kicked back resulting in the employee's hand striking the blade. The employee partially amputated his index fingertip requiring medical treatment. The employee was not hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2020, the Cedar Rapids site logged 3 recordable injuries or illnesses among about 103 workers: 3.1 per 100 full-time workers, against a median of 2.4 for its industry. Those cases cost 3 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Metal Design Systems, inc.
Cedar Rapids · 2020
103
3
1
3.1
2.4
Metal Design Systems, Inc
Cedar Rapids · 2017
79
1
0
1.2
2.4
Included with any plan: 3 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.212(a)(3)(ii)
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
29 CFR 1910.212(a)(3)(iii)
(iii) Special handtools for placing and removing material shall be such as to permit easy handling of material without the operator placing a hand in the danger zone. Such tools shall not be in lieu of other guarding required by this section, but can only be used to supplement protection provided.
Alert subscribers get notified of each newly cited employer in Iowa the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.