OSHA SearchOSHA records by employer

Metal Panels, Inc.: OSHA inspections and violations

Tulsa, Oklahoma · Sheet Metal Work Manufacturing · NAICS 332322

2inspections
1citation items
$8,192current penalties
Sep 2, 2021last inspection

Since 2008, OSHA inspectors have visited Metal Panels, Inc. in Oklahoma 2 times.

The most recent inspection opened on Sep 2, 2021 on a referral, in Tulsa.

In all, OSHA issued 1 citation item: 1 serious.

The penalties, $8,192 in total, stand where OSHA first set them.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Metal Panels, Inc. averages $8,192 across 1 cited inspection.

Metal Panels, Inc. also files yearly injury logs with OSHA, summarized below.

It reported 1 severe injury to OSHA since 2015.

Metal Panels, Inc.: OSHA citation items per year, 2008 to 2021
Citation items per year, by inspection date.

Oklahoma · latest 90 days of OSHA records

53employers cited

Get notified the morning OSHA posts each new citation in Oklahoma: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Oklahoma

Checking a subcontractor, a client or your own company? Watch Metal Panels, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Company-wide record

OSHA records show Metal Panels, Inc. at 2 sites in 2 states. Together they've had 5 inspections and $21,416 in current penalties.

We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.

Included with any plan: the site-by-site record for all 2 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.

See plans

Inspection history

Inspection 345525463 OPENED SEP 2, 2021Closed

Referral · Partial · Safety · 40 employees at the site · Closed May 12, 2022

131 S 147 E Ave, Tulsa, OK 74116 · Sheet Metal Work Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Aug 31, 2021: Employee amputates two fingers when reaching into shearing m

At 4:00 p.m. on August 31, 2021, an employee working as a machine operator for a sheet metal work manufacturer was working on a steel panel machine. The employee was working on the machine when the plastic coating was caught on the blades of the machine. The employee reached into the machine to remove the excess plastic build-up when the machine cutter was motion activated and struck his hand. The employee was hospitalized to treat amputated ring and pinky fingers.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(1) · Machine guarding
Serious$8,192$8,192Jan 11, 2022Final

Inspection 312377443 OPENED SEP 10, 2008Closed

Planned · No inspection · Safety · Closed Sep 10, 2008

10730 E. 55th Pl., Tulsa, OK 74146 · Sheet Metal Work Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2025, the Tulsa site logged 3 recordable injuries or illnesses among about 85 workers: 3.2 per 100 full-time workers, against a median of 3.6 for its industry. Those cases cost 52 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
Metal Panels Inc
Tulsa · 2025
85 333.23.6
Metal Panels, Inc
Tulsa · 2023
65 405.73.6

Included with any plan: 6 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.

See plans

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Aug 31, 2021, Tulsa: Amputation · amputations · finger(s), fingernail(s), unspecified

An employee was removing pieces of metal from a shearing machine. While clearing some film coating, the shear contacted his right hand, partially amputating the ring and little fingers.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

Other sheet metal work manufacturing employers in Oklahoma

Alert subscribers get notified of each newly cited employer in Oklahoma the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.