Lincoln, Nebraska · Fabricated Structural Metal Manufacturing · NAICS 332312
2inspections
3citation items
$34,681current penalties
Apr 8, 2025last inspection
Since 2024, OSHA inspectors have visited Metalworks Inc. in Nebraska 2 times.
The most recent inspection opened on Apr 8, 2025 on a referral, in Lincoln.
In all, OSHA issued 3 citation items: 3 serious.
The proposed penalties came to $44,229; today they stand at $34,681, 22% less.
The rule cited most here is 1910.147 (lockout/tagout), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Metalworks Inc. averages $17,340 across 2 cited inspections.
Metalworks Inc. also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Nebraska · latest 90 days of OSHA records
29employers cited
Get notified the morning OSHA posts each new citation in Nebraska: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Lincoln site logged 5 recordable injuries or illnesses among about 48 workers: 0.4 per 100 full-time workers, against a median of 2.3 for its industry. Those cases cost 11 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Metalworks Inc P Street
Lincoln · 2025
48
5
1
0.4
2.3
Metalworks Inc Airpark
Lincoln · 2025
188
0
0
0.0
2.4
Metalworks Inc
Lincoln · 2024
129
7
5
4.8
2.7
Metalworks Incorporated
Lincoln · 2024
34
3
1
7.8
2.7
Included with any plan: 3 more yearly logs from these sites, back to 2020, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Apr 2, 2025, Lincoln: Amputation · amputations involving bone loss · finger or thumb tip(s), nail(s)
An employee was forming a part on a brake press when the part she was holding forced her hand up against the punch, crushing two fingers on her right hand. The employee sustained amputations to the two fingertips at the first knuckle.
Jun 17, 2024, Lincoln: Amputation · amputations, avulsions, enucleations unspecified · finger or thumb tip(s), nail(s)
An employee was servicing an automatic load machine that raises up and down. The equipment lowered approximately 1 inch and their right middle finger got caught between a chain and pulley, resulting in a partial fingertip amputation.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(d)(4)(i)
(4) Lockout or tagout device application. (i) Lockout or tagout devices shall be affixed to each energy isolating device by authorized employees.
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
Other fabricated structural metal manufacturing employers in Nebraska
Alert subscribers get notified of each newly cited employer in Nebraska the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.