OSHA SearchOSHA records by employer

MJZ Services LLC: OSHA inspections and violations

Albany, New York · Painting and Wall Covering Contractors · NAICS 238320

1inspections
6citation items
$9,576current penalties
Oct 1, 2025last inspection

MJZ Services LLC has one OSHA inspection on record in New York.

OSHA opened it on Oct 1, 2025 on a referral, in Albany, and the case has not closed yet.

From that inspection OSHA issued 6 citation items: 6 serious.

OSHA proposed $43,033 in penalties. After settlements and reviews the total is $9,576, down 78%.

For context, across all construction employers the median penalty per cited inspection since 2015 is $3,080. MJZ Services LLC averages $9,576 over 1 cited inspection in that time.

MJZ Services LLC: OSHA citation items per year, 2025 to 2025
Citation items per year, by inspection date.

New York · latest 90 days of OSHA records

353employers cited

Get notified the morning OSHA posts each new citation in New York: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in New York

Checking a subcontractor, a client or your own company? Watch MJZ Services LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 348535949 OPENED OCT 1, 2025Open

Referral · Partial · Safety · 28 employees at the site · Open

19 Clinton Ave, Albany, NY 12207 · Painting and Wall Covering Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.21(b)(2) · Construction safety training
Serious$6,620$2,128Mar 20, 2026Final
Citation 1, item 2
29 CFR 1926.303(b)(1) · Abrasive wheels and tools
Serious$8,276$2,660Mar 20, 2026Final
Citation 1, item 3
29 CFR 1926.404(b)(1)(iii)(c) · Ground-fault protection on job sites
Serious$6,620$2,128Mar 20, 2026Final
Citation 1, item 4
29 CFR 1926.405(g)(2)(iv) · Job-site wiring
Serious$4,965$0Mar 20, 2026Final
Citation 1, item 5
29 CFR 1926.451(f)(1) · Scaffolds, general requirements
Serious$8,276$2,660Mar 20, 2026Final
Citation 1, item 6
29 CFR 1926.501(b)(1) · Fall protection in construction
Serious$8,276$0Mar 20, 2026Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.21 · Construction safety training

29 CFR 1926.21(b)(2)

(2) The employer shall instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his work environment to control or eliminate any hazards or other exposure to illness or injury.

29 CFR 1926.303 · Abrasive wheels and tools

29 CFR 1926.303(b)(1)

(b) Guarding. (1) Grinding machines shall be equipped with safety guards in conformance with the requirements of American National Standards Institute, B7.1-1970, Safety Code for the Use, Care and Protection of Abrasive Wheels, and paragraph (d) of this section.

29 CFR 1926.404 · Ground-fault protection on job sites

29 CFR 1926.404(b)(1)(iii)(c)

(C) Each cord set, attachment cap, plug and receptacle of cord sets, and any equipment connected by cord and plug, except cord sets and receptacles which are fixed and not exposed to damage, shall be visually inspected before each day's use for external defects, such as deformed or missing pins or insulation damage, and for indications of possible internal damage. Equipment found damaged or defective shall not be used until repaired.

29 CFR 1926.405 · Job-site wiring

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.501 · Fall protection in construction

Other painting and wall covering contractors employers in New York

Alert subscribers get notified of each newly cited employer in New York the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.