OSHA SearchOSHA records by employer

Moah Electric, Inc.: OSHA inspections and violations

Fort Worth, Texas · Electrical Contractors and Other Wiring Installation Contractors · NAICS 238210

2inspections
6citation items
$10,096current penalties
Oct 8, 2020last inspection

Since 2020, OSHA inspectors have visited Moah Electric, Inc. in Texas 2 times.

The most recent inspection opened on Oct 8, 2020 to follow up on an earlier case, in Lewisville.

In all, OSHA issued 6 citation items: 6 serious.

The proposed penalties came to $26,988; today they stand at $10,096, 63% less.

The rule cited most here is 1910.333 (working near live electrical parts), 3 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Moah Electric, Inc. averages $10,096 across 1 cited inspection.

It reported 1 severe injury to OSHA since 2015.

Moah Electric, Inc.: OSHA citation items per year, 2020 to 2020
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

391employers cited

7 of them in the same industry

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch Moah Electric, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344964697 OPENED OCT 8, 2020Closed

Follow-up · Partial · Safety · 24 employees at the site · Closed Oct 8, 2020

723 Hebron Parkway, Lewisville, TX 75057 · Electrical Contractors and Other Wiring Installation Contractors · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 344562665 OPENED JAN 16, 2020Closed

Referral · Partial · Safety · 35 employees at the site · Closed May 15, 2020

100 Throckmorton, Fort Worth, TX 76102 · Electrical Contractors and Other Wiring Installation Contractors · OSHA's record · Phone and website on Google Maps

Incident on Jan 11, 2020: Employee is burned by electrical arc flash

At 1:40 p.m. on January 11, 2020, an employee was attempting to replace a 480-volt electrical breaker when an arc flash occurred. The employee was hospitalized to treat electrical burns to his arms, face and torso.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.333(a)(1) · Working near live electrical parts
Serious$9,446$5,668Apr 8, 2020Final
Citation 1, item 1b
29 CFR 1910.333(b)(2) · Working near live electrical parts
Serious$0$0Apr 8, 2020Final
Citation 1, item 1c
29 CFR 1910.333(c)(2) · Working near live electrical parts
Serious$9,446$0Apr 8, 2020Final
Citation 1, item 2b
29 CFR 1910.335(a)(1)(i) · Safeguards for personnel protection
Serious$0$2,000Apr 8, 2020Final
Citation 1, item 3a
29 CFR 1910.137(c)(2)(viii) · Electrical protective equipment
Serious$4,048$2,429Apr 8, 2020Final
Citation 1, item 3b
29 CFR 1910.132(d)(1) · Personal protective equipment, general requirements
Serious$4,048$0Apr 8, 2020Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Jan 11, 2020, Fort Worth: Hospitalization · electrical burns, unspecified · nonclassifiable

An employee was working on 480 volt equipment when an arc flash occurred, burning the employee.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.132 · Personal protective equipment, general requirements

29 CFR 1910.132(d)(1)

(d) Hazard assessment and equipment selection. (1) The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). If such hazards are present, or likely to be present, the employer shall:

29 CFR 1910.137 · Electrical protective equipment

29 CFR 1910.137(c)(2)(viii)

(viii) Electrical protective equipment shall be subjected to periodic electrical tests. Test voltages and the maximum intervals between tests shall be in accordance with Table I-4 and Table I-5.

29 CFR 1910.333 · Working near live electrical parts

29 CFR 1910.333(a)(1)

(1) Deenergized parts. Live parts to which an employee may be exposed shall be deenergized before the employee works on or near them, unless the employer can demonstrate that deenergizing introduces additional or increased hazards or is infeasible due to equipment design or operational limitations. Live parts that operate at less than 50 volts to ground need not be deenergized if there will be no increased exposure to electrical burns or to explosion due to electric arcs.

29 CFR 1910.335 · Safeguards for personnel protection

Other electrical contractors and other wiring installation contractors employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.