OSHA SearchOSHA records by employer

Montemayor Welding: OSHA inspections and violations

Dawn, Texas · Welding and Soldering Equipment Manufacturing · NAICS 333992

1inspections
3citation items
$7,986current penalties
Sep 12, 2016last inspection

OSHA has inspected Montemayor Welding once in Texas.

The inspection began on Sep 12, 2016 after a fatality or catastrophe, in Dawn.

That inspection ended with 3 citation items: 3 serious.

Penalties were first proposed at $11,409 and now stand at $7,986, 30% lower after settlements or reviews.

Rigging equipment for material handling comes up most often in these citations: 3 items under 1926.251.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Montemayor Welding averages $7,986 (1 cited inspection).

1 inspection on this page followed a fatal incident.

Montemayor Welding: OSHA citation items per year, 2016 to 2016
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

393employers cited

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch Montemayor Welding and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 341766400 OPENED SEP 12, 2016Closed

Fatality or catastrophe · Complete · Safety · 9 employees at the site · Closed Aug 21, 2023

4805 Fm 809, Dawn, TX 79025 · Welding and Soldering Equipment Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Sep 9, 2016 (fatal): Employee is struck and killed by falling grain handling equi

At approximately 9:00 a.m. on September 9, 2016, an employee was operating an impact wrench to tighten nuts and bolts on equipment used for grain handling. The grain handling equipment was raised above ground and held with a nylon strap attached to a telehandler. The strap broke and the equipment fell. The employee was working below the raised load. The employee was struck and killed by falling load.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.251(a)(1) · Rigging equipment for material handling
Serious$3,803$2,662Mar 9, 2017Final
Citation 1, item 2
29 CFR 1926.251(a)(6) · Rigging equipment for material handling
Serious$3,803$2,662Mar 9, 2017Final
Citation 1, item 6
29 CFR 1926.251(e)(8)(iii) · Rigging equipment for material handling
Serious$3,803$2,662Mar 9, 2017Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.251 · Rigging equipment for material handling

29 CFR 1926.251(a)(1)

(a) General. (1) Rigging equipment for material handling shall be inspected prior to use on each shift and as necessary during its use to ensure that it is safe. Defective rigging equipment shall be removed from service.

29 CFR 1926.251(a)(6)

(6) Inspections. Each day before being used, the sling and all fastenings and attachments shall be inspected for damage or defects by a competent person designated by the employer. Additional inspections shall be performed during sling use, where service conditions warrant. Damaged or defective slings shall be immediately removed from service.

29 CFR 1926.251(e)(8)(iii)

(iii) Snags, punctures, tears or cuts;

Other welding and soldering equipment manufacturing employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.