OSHA SearchOSHA records by employer

Montgomery Custom Cabinets Inc.: OSHA inspections and violations

West Jordan, Utah · Showcase, Partition, Shelving, and Locker Manufacturing · NAICS 337215

1inspections
4citation items
$375current penalties
Sep 26, 2018last inspection

Montgomery Custom Cabinets Inc. has one OSHA inspection on record in Utah.

OSHA opened it on Sep 26, 2018 after a complaint, in West Jordan.

From that inspection OSHA issued 4 citation items: 3 serious and 1 other-than-serious.

OSHA proposed $750 in penalties. After settlements and reviews the total is $375, down 50%.

Most often, OSHA cited 1910.213, woodworking machinery (3 items).

For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Montgomery Custom Cabinets Inc. averages $375 over 1 cited inspection in that time.

Montgomery Custom Cabinets Inc.: OSHA citation items per year, 2018 to 2018
Citation items per year, by inspection date.

Utah · latest 90 days of OSHA records

67employers cited

Get notified the morning OSHA posts each new citation in Utah: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Utah

Checking a subcontractor, a client or your own company? Watch Montgomery Custom Cabinets Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343491239 OPENED SEP 26, 2018Closed

Complaint · Partial · Safety · 13 employees at the site · Closed Oct 19, 2018

4015 West Nike Drive, West Jordan, UT 84088 · Showcase, Partition, Shelving, and Locker Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$750$375Oct 4, 2018Final
Citation 1, item 1b
29 CFR 1910.213(c)(2) · Woodworking machinery
Serious$0$0Oct 4, 2018Final
Citation 1, item 1c
29 CFR 1910.213(c)(3) · Woodworking machinery
Serious$0$0Oct 4, 2018Final
Citation 1, item 2
29 CFR UAC R614-1-5.C.7
Other-than-serious$0$0Oct 4, 2018Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

29 CFR 1910.213(c)(3)

(3) Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut.

Other showcase, partition, shelving, and locker manufacturing employers in Utah

Alert subscribers get notified of each newly cited employer in Utah the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.