OSHA SearchOSHA records by employer

MQM: OSHA inspections and violations

Edison, New Jersey · Siding Contractors · NAICS 238170

1inspections
5citation items
$26,788current penalties
Mar 31, 2023last inspection

OSHA inspectors have visited MQM in New Jersey one time.

It opened on Mar 31, 2023 as part of a related case, in Edison and is still open.

In all, OSHA issued 5 citation items: 4 serious and 1 repeat.

The penalties, $26,788 in total, stand where OSHA first set them.

Among construction employers, the typical cited inspection since 2015 ends with a $3,079 penalty. MQM averages $26,788 across 1 cited inspection.

MQM: OSHA citation items per year, 2023 to 2023
Citation items per year, by inspection date.

Want to know if OSHA cites MQM again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 346604390 OPENED MAR 31, 2023Open

Programmed related · Partial · Safety · 3 employees at the site · Open

492 Plainfield Rd, Edison, NJ 08820 · Siding Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.102(a)(1) · Eye and face protection in construction
 Serious$3,349$3,349Jul 14, 2023Final
Citation 1, item 2
29 CFR 1926.304(g)(1) · Woodworking tools
 Serious$4,688$4,688Jul 14, 2023Final
Citation 1, item 3
29 CFR 1926.451(g)(1) · Scaffolds, general requirements
 Repeat$9,375$9,375Jul 14, 2023Final
Citation 1, item 4
29 CFR 1926.452(j)(2) · Rules for each type of scaffold
 Serious$4,688$4,688Jul 14, 2023Final
Citation 1, item 5
29 CFR 1926.503(a)(1) · Fall protection training in construction
 Serious$4,688$4,688Jul 14, 2023Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.102 · Eye and face protection in construction

29 CFR 1926.102(a)(1)

(a) General. (1) The employer shall ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation.

29 CFR 1926.304 · Woodworking tools

29 CFR 1926.304(g)(1)

(g) Radial saws. (1) The upper hood shall completely enclose the upper portion of the blade down to a point that will include the end of the saw arbor. The upper hood shall be constructed in such a manner and of such material that it will protect the operator from flying splinters, broken saw teeth, etc., and will deflect sawdust away from the operator. The sides of the lower exposed portion of the blade shall be guarded to the full diameter of the blade by a device that will automatically adjust itself to the thickness of the stock and remain in contact with stock being cut to give maximum protection possible for the operation being performed.

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.451(g)(1)

(g) Fall protection. (1) Each employee on a scaffold more than 10 feet (3.1 m) above a lower level shall be protected from falling to that lower level. Paragraphs (g)(1) (i) through (vii) of this section establish the types of fall protection to be provided to the employees on each type of scaffold. Paragraph (g)(2) of this section addresses fall protection for scaffold erectors and dismantlers.

29 CFR 1926.452 · Rules for each type of scaffold

29 CFR 1926.503 · Fall protection training in construction

Other siding contractors employers in New Jersey

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.