OSHA SearchOSHA records by employer

Mta NYCT Electronics Maintenance Division: OSHA inspections and violations

Long Island City, New York · Mixed Mode Transit Systems · NAICS 485111

2inspections
8citation items
$0current penalties
Dec 18, 2019last inspection

Since 2019, OSHA inspectors have visited Mta NYCT Electronics Maintenance Division in New York 2 times.

The most recent inspection opened on Dec 18, 2019 to follow up on an earlier case, in Long Island City.

In all, OSHA issued 8 citation items: 8 serious.

No penalty came with these citations.

The rule cited most here is 1910.37 (exit routes), 3 times.

Among transportation and warehousing employers, the typical cited inspection since 2015 ends with a $2,415 penalty. Mta NYCT Electronics Maintenance Division averages $0 across 1 cited inspection.

Mta NYCT Electronics Maintenance Division: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

New York · latest 90 days of OSHA records

353employers cited

Get notified the morning OSHA posts each new citation in New York: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in New York

Checking a subcontractor, a client or your own company? Watch Mta NYCT Electronics Maintenance Division and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344521638 OPENED DEC 18, 2019Closed

Follow-up · Partial · Safety · Local government · 65 employees at the site · Closed Dec 18, 2019

29-76 Northern Blvd, Long Island City, NY 11101 · Mixed Mode Transit Systems · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 344340096 OPENED SEP 19, 2019Closed

Complaint · Partial · Safety · Local government · 200 employees at the site · Closed Dec 20, 2019

29-76 Northern Blvd, Long Island City, NY 11101 · Mixed Mode Transit Systems · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.37(a)(3) · Exit routes
Serious$0$0Nov 21, 2019Final
Citation 1, item 2
29 CFR 1910.37(a)(4) · Exit routes
Serious$0$0Nov 21, 2019Final
Citation 1, item 3
29 CFR 1910.37(b)(4) · Exit routes
Serious$0$0Nov 21, 2019Final
Citation 1, item 4
29 CFR 1910.157(e)(3) · Portable fire extinguishers
Serious$0$0Nov 21, 2019Final
Citation 1, item 5
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
Serious$0$0Nov 21, 2019Final
Citation 1, item 6
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Serious$0$0Nov 21, 2019Final
Citation 1, item 7
29 CFR 1910.303(g)(1) · Electrical equipment, general requirements
Serious$0$0Nov 21, 2019Final
Citation 1, item 8
29 CFR 1910.305(j)(2)(iv) · Electrical wiring methods
Serious$0$0Nov 21, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.157 · Portable fire extinguishers

29 CFR 1910.157(e)(3)

(3) The employer shall assure that portable fire extinguishers are subjected to an annual maintenance check. Stored pressure extinguishers do not require an internal examination. The employer shall record the annual maintenance date and retain this record for one year after the last entry or the life of the shell, whichever is less. The record shall be available to the Assistant Secretary upon request.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(a)(4)

(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.

29 CFR 1910.215(b)(9)

(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)

29 CFR 1910.303 · Electrical equipment, general requirements

29 CFR 1910.305 · Electrical wiring methods

29 CFR 1910.37 · Exit routes

Other mixed mode transit systems employers in New York

Alert subscribers get notified of each newly cited employer in New York the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.