OSHA has inspected MW Industries, Inc. 2 times in Maryland since 2020.
The latest one began on Jan 19, 2022 after an accident, in Baltimore; the case is still open.
Those inspections ended with 2 citation items: 2 serious.
Penalties were first proposed at $6,375 and now stand at $4,988, 22% lower after settlements or reviews.
Machine guarding comes up most often in these citations: 2 items under 1910.212.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and MW Industries, Inc. averages $2,494 (2 cited inspections).
MW Industries, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Maryland · latest 90 days of OSHA records
189employers cited
Get notified the morning OSHA posts each new citation in Maryland: the employer, the site address, the rules broken and the penalty.
Incident on Jan 17, 2022: Employee amputates fingertip in steel roller
At 10:30 a.m. on January 17, 2022, an employee was demonstrating rethreading to a new coworker on a Herdon CSC-80T CNC Spring Making Machine. The rethreading process is normally conducted by a single operator who would have one hand holding the steel wire in place while the other hand was operating the controls. The new coworker was attempting the rethreading by himself but was unable to straighten the wire. The employee straightened the wire with his right hand then used the roller controller with his left hand to lower the rollers while his fingers were still at the nip point. The employee explained that he lowered the rollers out of habit, since he usually lowered the rollers after he set the wire in place. The employee was hospitalized and the tip of his middle finger was amputated.
Incident on Feb 21, 2020: Employee amputates fingertip in bending machine
At 6:00 p.m. on February 21, 2020, Employee #1 was cleaning a bending machine with a piece of rag. The employee's thigh inadvertently depressed the pneumatic lever on the machine, causing the machine to operate, resulting in the amputation of Employee #1's middle fingertip. Employee #1 was taken to the hospital but discharged the same day.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2018, the Baltimore site logged 10 recordable injuries or illnesses among about 84 workers: 12.4 per 100 full-time workers, against a median of 3.3 for its industry. Those cases cost 11 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Maryland Precision Spring
Baltimore · 2018
84
10
3
12.4
3.3
Included with any plan: 1 more yearly log from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.212(a)(3)(ii)
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
Alert subscribers get notified of each newly cited employer in Maryland the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.