OSHA SearchOSHA records by employer

My Wood Loft.Com, LLC: OSHA inspections and violations

North Ridgeville, Ohio · Custom Architectural Woodwork and Millwork Manufacturing · NAICS 337212

1inspections
3citation items
$2,833current penalties
Dec 6, 2019last inspection

My Wood Loft.Com, LLC has one OSHA inspection on record in Ohio.

OSHA opened it on Dec 6, 2019 on a referral, in North Ridgeville.

From that inspection OSHA issued 3 citation items: 3 serious.

OSHA proposed $9,832 in penalties. After settlements and reviews the total is $2,833, down 71%.

Most often, OSHA cited 1910.213, woodworking machinery (3 items).

For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. My Wood Loft.Com, LLC averages $2,833 over 1 cited inspection in that time.

My Wood Loft.Com, LLC: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Ohio · latest 90 days of OSHA records

263employers cited

Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Ohio

Checking a subcontractor, a client or your own company? Watch My Wood Loft.Com, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344493804 OPENED DEC 6, 2019Closed

Referral · Partial · Safety · 7 employees at the site · Closed Dec 2, 2020

39097 Center Ridge Rd, North Ridgeville, OH 44039 · Custom Architectural Woodwork and Millwork Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Dec 3, 2019: Employee incurs partial finger amputation while using table

At 9:15 a.m. on December 3, 2019, one English speaking male, age 24, was using a table saw to trim a piece of wood, approximately 5 feet long by 4 inches wide. At the end of the rip, with approximately 1/2 inch left, the employee reached down to grab the piece, placing his hand on the unguarded saw blade. The employee received two partial amputations and associated lacerations. No guard was in place at the time of the incident. The incident occurred indoors, so weather was not a factor. The employee was hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$4,048$2,833Feb 26, 2020Final
Citation 1, item 1b
29 CFR 1910.213(c)(2) · Woodworking machinery
Serious$2,892$0Feb 26, 2020Final
Citation 1, item 1c
29 CFR 1910.213(c)(3) · Woodworking machinery
Serious$2,892$0Feb 26, 2020Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

29 CFR 1910.213(c)(3)

(3) Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut.

Other custom architectural woodwork and millwork manufacturing employers in Ohio

Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.