OSHA SearchOSHA records by employer

Nature's Granite, LLC: OSHA inspections and violations

Grantsville, Maryland · Cut Stone and Stone Product Manufacturing · NAICS 327991

1inspections
6citation items
$1,510current penalties
May 6, 2020last inspection

OSHA has inspected Nature's Granite, LLC once in Maryland.

The inspection began on May 6, 2020 after an accident, in Grantsville.

That inspection ended with 6 citation items: 4 serious and 2 other-than-serious.

Penalties were first proposed at $2,800 and now stand at $1,510, 46% lower after settlements or reviews.

Personal protective equipment, general requirements comes up most often in these citations: 2 items under 1910.132.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Nature's Granite, LLC averages $1,510 (1 cited inspection).

Nature's Granite, LLC: OSHA citation items per year, 2020 to 2020
Citation items per year, by inspection date.

Maryland · latest 90 days of OSHA records

194employers cited

Get notified the morning OSHA posts each new citation in Maryland: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Maryland

Checking a subcontractor, a client or your own company? Watch Nature's Granite, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344743158 OPENED MAY 6, 2020Closed

Accident · Partial · Safety · 10 employees at the site · Closed Oct 13, 2020

326 Zion School Road, Grantsville, MD 21536 · Cut Stone and Stone Product Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on May 5, 2020: Employee fractures tibia and fibula when crushed by quartz s

At 11:30 a.m. on May 5, 2020, an employee was moving four 10 ?-foot by 5-foot quartz slabs from the outside storage lot to inside the facility. Each slab weighed approximately 400 pounds. While placing a wedge into the stacked slabs, the slabs began to fall, striking and crushing the employee and his left leg and pinning him underneath four quartz slabs. It was determined through interviews that the employees typically move these slabs with an Abaco Little Giant Lifter clamp that securely would hold the slabs. Also, the company only approves the use of the forklift located onsite to move these slabs with the clamp attachment. During this incident, the employees were operating a CAT 303 5E2 mini excavator with the clamp attached to the bucket. The employee sustained a compound fracture to his left tibia and fibula. The employee also sustained a sprained left wrist and blood vessel and nerve damage to his leg. The employee was hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.132(f)(1) · Personal protective equipment, general requirements
Serious$900$485Sep 10, 2020Final
Citation 1, item 1b
29 CFR 1910.135(a)(1) · Head protection
Serious$0$0Sep 10, 2020Final
Citation 1, item 1c
29 CFR 1910.138(a) · Gloves and hand protection
Serious$0$0Sep 10, 2020Final
Citation 1, item 2
29 CFR 05-104(A)
Serious$1,900$1,025Sep 10, 2020Final
Citation 2, item 1
29 CFR 1910.132(d)(2) · Personal protective equipment, general requirements
Other-than-serious$0$0Sep 10, 2020Final
Citation 2, item 2
29 CFR 5-503(A)(1)
Other-than-serious$0$0Sep 10, 2020Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.132 · Personal protective equipment, general requirements

29 CFR 1910.132(d)(2)

(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.

29 CFR 1910.132(f)(1)

(f) Training. (1) The employer shall provide training to each employee who is required by this section to use PPE. Each such employee shall be trained to know at least the following:

29 CFR 1910.135 · Head protection

29 CFR 1910.135(a)(1)

(a) General requirements. (1) The employer shall ensure that each affected employee wears a protective helmet when working in areas where there is a potential for injury to the head from falling objects.

29 CFR 1910.138 · Gloves and hand protection

Other cut stone and stone product manufacturing employers in Maryland

Alert subscribers get notified of each newly cited employer in Maryland the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.