Elizabethton, Tennessee · All Other Miscellaneous Fabricated Metal Product Manufacturing · NAICS 332999
5inspections
5citation items
$9,825current penalties
Nov 27, 2018last inspection
Nci Group, Inc. has 5 OSHA inspections on record in Tennessee, the first in 2015.
OSHA's last visit started on Nov 27, 2018 on a referral, in Memphis.
Across those inspections OSHA issued 5 citation items: 4 serious and 1 other-than-serious.
OSHA proposed $12,175 in penalties. After settlements and reviews the total is $9,825, down 19%.
Most often, OSHA cited 1910.212, machine guarding (2 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Nci Group, Inc. averages $2,456 over 4 cited inspections in that time.
Nci Group, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Tennessee · latest 90 days of OSHA records
334employers cited
Get notified the morning OSHA posts each new citation in Tennessee: the employer, the site address, the rules broken and the penalty.
OSHA records show Nci Group, Inc. at 14 sites in 10 states. Together they've had 27 inspections and $125,772 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 14 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Nov 19, 2018: Employee amputates three fingertips when caught in machine r
At 11:45 p.m. on November 19, 2018, an employee was cleaning the build up off of the feed roll while the machine was still in operation and had his right hand pulled into it, catching his fingers in the feed rollers. The employee amputating his index, middle, and ring fingertips. The employee was hospitalized.
Incident on Feb 8, 2018: Employee is knocked over by steel coil crushing and amputati
At 1:30 a.m. on February 8, 2018, an employee was assisting with the offloading of two narrow slit steel coils from the mandrel of the recoiling machine on the slit line. The employee was knocked to the floor when the coil fell forward and crushed his left leg. The employee's leg was amputated and he was hospitalized.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR TCA 50-3-105(1)
Serious
$4,000
$3,450
Apr 13, 2018
Final
Inspection 342202421 OPENED MAR 27, 2017Closed
Complaint · Partial · Safety · 5,500 employees at the site · Closed Apr 18, 2017
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2018, the Memphis site logged 6 recordable injuries or illnesses among about 47 workers: 10.2 per 100 full-time workers, against a median of 3.2 for its industry. Those cases cost 361 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Metal Prep Memphis
Memphis · 2018
47
6
3
10.2
3.2
Included with any plan: 2 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(h) Employee information and training. (1) Employers shall provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new chemical hazard the employees have not previously been trained about is introduced into their work area. Information and training may be designed to cover categories of hazards (e.g., flammability, carcinogenicity) or specific chemicals. Chemical-specific information must always be available through labels and safety data sheets.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
Other all other miscellaneous fabricated metal product manufacturing employers in Tennessee
Alert subscribers get notified of each newly cited employer in Tennessee the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.