New Age Manufacturing: OSHA inspections and violations
Plattsmouth, Nebraska · Plastics Material and Resin Manufacturing · NAICS 325211
1inspections
3citation items
$5,759current penalties
May 29, 2024last inspection
New Age Manufacturing has one OSHA inspection on record in Nebraska.
OSHA opened it on May 29, 2024 as a planned inspection, in Plattsmouth.
From that inspection OSHA issued 3 citation items: 3 serious.
OSHA proposed $9,598 in penalties. After settlements and reviews the total is $5,759, down 40%.
Most often, OSHA cited 1910.213, woodworking machinery (2 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. New Age Manufacturing averages $5,759 over 1 cited inspection in that time.
New Age Manufacturing also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Nebraska · latest 90 days of OSHA records
30employers cited
Get notified the morning OSHA posts each new citation in Nebraska: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Plattsmouth site logged 0 recordable injuries or illnesses among about 54 workers: 0.0 per 100 full-time workers, against a median of 2.7 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
New Age
Plattsmouth · 2025
54
0
0
0.0
2.7
2317 Warren Drive
Plattsmouth · 2024
54
2
1
3.9
2.7
2102 S 15th St
Plattsmouth · 2020
6
0
0
0.0
2.7
Included with any plan: 6 more yearly logs from these sites, back to 2018, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po
29 CFR 1910.213(c)(3)
(3) Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut.
(iii) Flexible cords and cables shall be connected to devices and fittings so that strain relief is provided that will prevent pull from being directly transmitted to joints or terminal screws.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.