OSHA SearchOSHA records by employer

Newtron Beaumont LLC: OSHA inspections and violations

Beaumont, Texas · Electrical Contractors and Other Wiring Installation Contractors · NAICS 238210

1inspections
2citation items
$16,708current penalties
Feb 13, 2019last inspection

OSHA inspectors have visited Newtron Beaumont LLC in Texas one time.

It opened on Feb 13, 2019 on a referral, in Beaumont.

In all, OSHA issued 2 citation items: 2 serious.

The proposed penalties came to $23,868; today they stand at $16,708, 30% less.

The rule cited most here is 1910.333 (working near live electrical parts), 2 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Newtron Beaumont LLC averages $16,708 across 1 cited inspection.

It reported 2 severe injuries to OSHA since 2015.

Newtron Beaumont LLC: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

391employers cited

7 of them in the same industry

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch Newtron Beaumont LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343786810 OPENED FEB 13, 2019Closed

Referral · Partial · Safety · 500 employees at the site · Closed Jun 30, 2020

14385 West Port Arthur Rd, Beaumont, TX 77705 · Electrical Contractors and Other Wiring Installation Contractors · OSHA's record · Phone and website on Google Maps

Incident on Feb 6, 2019: Employee receives burns to hands and face during arc flash

At 3:00 p.m. on February 6, 2019, an employee worked on a 4E electrical panel. While tucking a wire into the panel, an arc flash occurred and burned the employee's face and hands. The employee was hospitalized for treatment.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.333(a)(1) · Working near live electrical parts
Serious$11,934$8,354May 22, 2019Final
Citation 1, item 2
29 CFR 1910.333(b)(2)(iv)(b) · Working near live electrical parts
Serious$11,934$8,354May 22, 2019Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.

Feb 6, 2019, Beaumont: Hospitalization · electrical burns, unspecified · multiple body parts, n.e.c.

Employees were terminating cables at a job site. The electrical room was locked out and all grounds were applied. The employees had finished the task and were grabbing their tools. As they were walking out, an arc flash occurred and caused burns to the injured employee's right hand and face.

Feb 11, 2016, Beaumont: Hospitalization · first degree heat (thermal) burns · nonclassifiable

An employee was running a conduit when a byproduct of the plant fell off a conveyor belt into a hot water tank. The water splattered onto the employee, causing skin burns.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.333 · Working near live electrical parts

29 CFR 1910.333(a)(1)

(1) Deenergized parts. Live parts to which an employee may be exposed shall be deenergized before the employee works on or near them, unless the employer can demonstrate that deenergizing introduces additional or increased hazards or is infeasible due to equipment design or operational limitations. Live parts that operate at less than 50 volts to ground need not be deenergized if there will be no increased exposure to electrical burns or to explosion due to electric arcs.

29 CFR 1910.333(b)(2)(iv)(b)

(B) A qualified person shall use test equipment to test the circuit elements and electrical parts of equipment to which employees will be exposed and shall verify that the circuit elements and equipment parts are deenergized. The test shall also determine if any energized condition exists as a result of inadvertently induced voltage or unrelated voltage backfeed even though specific parts of the circuit have been deenergized and presumed to be safe. If the circuit to be tested is over 600 volts, nominal, the test equipment shall be checked for proper operation immediately before and immediately after this test.

Other electrical contractors and other wiring installation contractors employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.