OSHA inspectors have visited Neyra Industries, Inc. in Florida one time.
It opened on Dec 6, 2024 after a complaint, in Apopka.
In all, OSHA issued 4 citation items: 4 serious.
The proposed penalties came to $21,848; today they stand at $13,109, 40% less.
The rule cited most here is 1910.215 (grinders and abrasive wheels), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Neyra Industries, Inc. averages $13,109 across 1 cited inspection.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Florida · latest 90 days of OSHA records
320employers cited
Get notified the morning OSHA posts each new citation in Florida: the employer, the site address, the rules broken and the penalty.
OSHA records show Neyra Industries, Inc. at 4 sites in 2 states. Together they've had 8 inspections and $23,079 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 4 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Jan 27, 2015, Apopka: Hospitalization · heat (thermal) burns, unspecified · multiple body parts, n.e.c.
An employee welding a cable guide pipe to a tank containing road tar suffered burns to his right side legs, arm, neck, and face when the contents of the tank caught on fire.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
29 CFR 1910.215(b)(9)
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
Alert subscribers get notified of each newly cited employer in Florida the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.