Since 1998, OSHA inspectors have visited Nor-Cal Products in California 10 times.
The most recent inspection opened on Jul 14, 2017 after a complaint, in Yreka.
In all, OSHA issued 25 citation items: 6 serious and 19 other-than-serious.
The proposed penalties came to $51,865; today they stand at $17,520, 66% less.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Nor-Cal Products averages $280 across 1 cited inspection.
Nor-Cal Products also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
California · latest 90 days of OSHA records
1,130employers cited
Get notified the morning OSHA posts each new citation in California: the employer, the site address, the rules broken and the penalty.
Incident on May 8, 2009: Employee's finger is crushed by gate valve, later amputated
On May 8, 2009, Employee #1, a quality control technician employed by a company that manufactures metal products for high tech industries, was preparing to insp ect a specialty pump for proper functioning and tolerances. Employee #1 provided power to the pump, before placing a cover over the pump's gate valve. She bent down to retrieve the cover on a lower shelf of the cart that the pump was being tested on. As she was bending down with her hand resting on the edge of the valv e case, the gate valve activated. The closing gate valve crushed Employee #1's l eft middle finger tip. Employee #1 was hospitalized, and her left middle finger tip was amputated by a doctor.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3314 C01
Other-than-serious
$600
$600
Oct 20, 2009
Closed
Inspection 125820332 OPENED MAR 21, 2007Closed
Follow-up · Partial · Safety · 220 employees at the site · Closed Jun 15, 2007
Incident on Feb 12, 2007: Employee's fingers are amputated when caught in belt pulley
At approximately 2:50 p.m. on February 12, 2007, an employee and a coworker were testing the Servo control on the Lucas Number 3 Horizontal Boring machine. Acco rding to all accounts the Lucas Number 3 was locked and tagged out during the in itial installation of the Servo motor. Following the installation of the motor t he Lucas Number 3 was energized to test the repair. Immediately, a servo motor o verload alarm displayed and the employee and the coworker returned to a troubles hooting mode. The coworker was tracing and checking wire connections within the control cabinet located on the side of the servo motor. The employee was testing the Servo motor by reaching in to the housing compartment of the motor pulley, drive belt, and spindle drive pulley to pull down on the idle drive belt; expect ing the servo to sense the slight movement and respond by bringing in back to it s original idle position. The employee stated that he had observed the previous maintenance manager test the servo this way as well as the out serviced technica l support personnel, and had preformed the same test in the presence of the prev ious maintenance manager with the expected outcome. Rather than returning to idl e as it had during previous tests, the servo started rapidly, pulling the employ ee's left hand into the spindle drive pulley severely cutting his second and thi rd fingers. Although he was not hospitalized for greater than 24 hours, the empl oyee stated that there was some bone loss to the tip of his left middle finger.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3314 G02 A
Other-than-serious
$750
$750
Apr 12, 2007
Final
Citation 2, item 1
29 CFR 3314 D
Serious
$18,000
$3,000
Apr 12, 2007
Final
Inspection 310408950 OPENED FEB 15, 2007Closed
Complaint · Partial · Safety · 220 employees at the site · Closed Mar 5, 2007
Incident on Apr 15, 2006: Employee skins finger when ring becomes caught on bolt
At approximately 6:00 p.m. on April 15, 2006, Employee #1, a Vice President of a large machine shop that manufactures ultra-high vacuum chambers and components, was in the facilities warehouse looking for a box to send personal items to a r elative. The vacuum chambers and components manufactures are primarily used by b usinesses in the information technology industry to manufacture computer chips. He saw a box on the top of a racking system, and instead of getting a ladder to reach it, he climbed onto the second shelf of the racking system to grab the box . He supported himself by holding onto the top shelf with his left hand and then reached with his right hand for the box. As Employee #1 retrieved the box and w as descending with the box in his right hand, he felt a slight tug on his left h and. When he reached the ground and released his grip from the racking system wi th his left hand, he noticed that his left hand was bleeding and his ring finger was completely skinned with a portion of his bone exposed. Employee #1 was hosp italized and treated for his injury, which required the amputation of his left r ing finger. The accident investigation found that a large bolt, protruding from the racking system, had caught a hold of his wedding ring, caused his finger to be skinned.
No citations from this inspection.
Inspection 300741980 OPENED OCT 5, 2004Closed
Planned · Complete · Safety · 226 employees at the site · Closed Mar 6, 2008
Incident on Jan 27, 1998: Employee's legs burned by nitric acid when pump switches on
Employee #1, who worked for a company that made components for high-vacuum indus trial pumps, was preparing to add nitric acid to the cleaning tank where metal p ump parts are dipped as part of the manufacturing process. He was using an elect ric transfer pump and placed the intake hose into the drum containing the nitric acid. He then plugged the pump's electric cord into the wall but didn't check w hether the switch on the pump was 'off' position. The pump activated and the hos e jumped out of the tank, spraying nitric acid in all directions. Employee #1 su stained second- and third-degree burns on the lower part of both legs. His injur ies were made worse by his not washing inadequately after the nitric acid exposu re.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 5194 H03 E
Other-than-serious
$1,405
$0
Apr 17, 1998
Final
Citation 2, item 1
29 CFR 5154 J01
Serious
$5,000
$5,000
Apr 17, 1998
Final
Injury and illness logs
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Yreka site logged 0 recordable injuries or illnesses among about 201 workers: 0.0 per 100 full-time workers, against a median of 2.4 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Nor-Cal Products
Yreka · 2025
201
0
0
0.0
2.4
Nor-Cal
Yreka · 2020
220
5
0
2.4
2.4
Nor-Cal Products, Inc.
Yreka · 2018
217
14
3
6.2
2.4
Included with any plan: 1 more yearly log from these sites, back to 2018, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Alert subscribers get notified of each newly cited employer in California the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.