Northwest Pipe Company: OSHA inspections and violations
Adelanto, California · Fabricated Pipe and Pipe Fitting Manufacturing · NAICS 332996
15inspections
26citation items
$19,225current penalties
Sep 17, 2020last inspection
Since 1991, OSHA inspectors have visited Northwest Pipe Company in California 15 times.
The most recent inspection opened on Sep 17, 2020 after an accident, in Tracy.
In all, OSHA issued 26 citation items: 4 serious and 22 other-than-serious.
The proposed penalties came to $43,530; today they stand at $19,225, 56% less.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Northwest Pipe Company averages $1,012 across 2 cited inspections.
2 inspections on this page followed a fatal incident.
Northwest Pipe Company also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
California · latest 90 days of OSHA records
1,139employers cited
Get notified the morning OSHA posts each new citation in California: the employer, the site address, the rules broken and the penalty.
Incident on Aug 22, 2020: Employee fractures hand when pinched between pipe and sander
At 10:30 a.m. on August 22, 2020, an employee working as a laborer for a pipe and pipe fitting fabricator was operating the CCP belt sander. The employee touched the weld being sanded to judge how much more sanding was needed. In doing so, he pinched his left hand between the pipe and sanding belt. The employee fractured his left middle finger, requiring outpatient surgery to insert pins into his finger.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3203(A)(4)
Other-than-serious
$600
$600
Feb 19, 2021
Final
Citation 1, item 2
29 CFR 4312
Other-than-serious
$1,200
$1,200
Feb 19, 2021
Final
Inspection 344534904 OPENED DEC 31, 2019Closed
Accident · Partial · Safety · 133 employees at the site · Closed Feb 16, 2021
Incident on Dec 5, 2019: Employee amputates fingertip after reaching into running mac
At 9:50 a.m. on December 5, 2019, was operating an OD blast machine. While the machine was running the employee reached his gloved hand into the running machine to pull out a plastic foam insert. The employee's glove was caught by a rolling pipe and conveyor, resulting in the amputation of his left index and middle fingertips. The employee was hospitalized.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 2, item 1
29 CFR 3314(C)
Other-than-serious
$750
$225
May 12, 2020
Final
Inspection 310603279 OPENED JUN 24, 2008Closed
Accident · Partial · Safety · 302 employees at the site · Closed Mar 24, 2010
Incident on May 29, 2008: Employee's fingers are amputated in forklift accident
At approximately 6:55 p.m. on May 29, 2008, Employee #1, a 44-year-old male empl oyed by a company that primarily manufactured welded steel pipes for water trans mission and treatment, was operating a Hyster forklift (Model Number H50XM; Seri al Number D177B37149U). The forklift had a rollover protective structure (ROPS). Employee #1 inadvertently grabbed the ROPS with his right hand, as he looked ba ck to his left. He backed the forklift into the beveled edge of a 115-inch diame ter pipe that was sitting on a fit-up roller ("at the Can Line Bay"). The sheari ng action created when Employee #1's hand was caught between the beveled pipe ed ge and the rear upright member of the ROPS caused his right index, middle, ring, and pinky fingers to be amputated. The on-sight supervisor called Emergency Med ical Services, and an ambulance transported Employee #1 to Loma Linda University Medical Center. Employee #1 underwent surgery and was hospitalized for eight da ys.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3650 T05
Other-than-serious
$750
$750
Nov 19, 2008
Closed
Inspection 112034020 OPENED FEB 21, 2007Closed
Accident · Partial · Safety · 295 employees at the site · Closed Jul 18, 2007
Incident on Jan 19, 2007: Employee lrg is fractured when he jumps from a ladder
At approximately 9:00 a.m. on January 19, 2007, Employee #1, a painter, was in t he sandblast area of a plant. He was using a 16 ft metal ladder, a McMaster Carr Number 8167T26, and a 21,900 pound lined and coated steel elbow, identified as AD-06 MK-13, total length of 16 ft, lay length of 14.275 ft, with a 146.75-in. o utside diameter, 0.625-in. Thick. The elbow was placed on a wooden dunnage in or der for Employee #1 to sandblast an over spray of concrete curing compound. The short line was facing north. The dunnage consisted of three 6-in. by 6-in. by 8- in. boards. Three 6-in. by 6-in. chocks were placed on the boards at the long li ne. When the elbow was lowered, it began to roll, so the elbow was raised, the c hocks reset, and an additional chock was placed on the East board, and an 8-in. by 8-in. by 4 ft chock was placed on the middle board at the short line. Employe e #1 climbed up a 16 ft metal ladder that was resting on the long line of the el bow in order to remove the over spray. The elbow rolled off the wooden dunnage a nd toward him. Employee #1's right leg was fractured, and he was hospitalized.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3650 T02
Other-than-serious
$635
$0
Mar 21, 2007
Closed
Citation 1, item 2
29 CFR 3650 T11
Other-than-serious
$635
$0
Mar 21, 2007
Closed
Citation 2, item 1
29 CFR 3704
Other-than-serious
$18,000
$2,550
Mar 21, 2007
Closed
Inspection 300865235 OPENED MAR 16, 2004Closed
Complaint · Partial · Safety · 157 employees at the site · Closed Jul 12, 2016
Incident on Mar 2, 2002: Employee injured when thumb caught in sprocket chain drive
At 8:40 a.m. on March 2, 2002, a serious amputation injury occurred at the North west Pipe Company. The employer is primarily engaged in manufacture, cement mort ar coating, shipping and distribution of steel pipes utilized for potable water transmission lines. Employee #1 was greasing sprockets and sprocket chain drives of the feeder belt assembly of a "small cement coater" machine and sustained th e amputation of his right thumb. The cuff of the glove on Employee #1's right ha nd got caught by the moving top sprocket and sprocket chain drive, pulling his r ight thumb into the moving gears of the gage wheel. The machine was not deenergi zed or stopped prior to greasing the feeder belt assembly of the cement mortar c oater machine. Employee #1 was taken to Loma Linda University Medical Center in Loma Linda, California for treatment and was treated and released. A couple of s urgeries were performed at a later date.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3314 A
Other-than-serious
$750
$300
Aug 26, 2002
Final
Citation 1, item 2
29 CFR 3314 H
Other-than-serious
$375
$150
Aug 26, 2002
Final
Citation 1, item 3
29 CFR 3384 B
Other-than-serious
$750
$0
Aug 26, 2002
Final
Citation 2, item 1
29 CFR 4075 A
Serious
$6,750
$2,700
Aug 26, 2002
Final
7 older inspections
Inspection 125968198 OPENED OCT 18, 2001Closed
Accident · Partial · Safety · 178 employees at the site · Closed May 3, 2002
Incident on Aug 13, 2001: Employee falls from platform
At approximately 5:30 a.m. on August 13, 2001, Employee #1, a laborer employed b y Northwest Pipe Company, sustained varying soft tissue injuries to his left elb ow and forearm after slipping and falling 43.25 inches from a loading platform, while he was removing protective paper wrapping from 90- to 100-pound drums and cylinders of solid coal tar. While on the ground, a drum part struck Employee #1 's forearm and elbow. Employee #1 was transported by helicopter to the Arrowhead Regional Medical Center, where he was treated and hospitalized for 5 days.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3273 A
Other-than-serious
$560
$300
Nov 14, 2001
Final
Inspection 119967289 OPENED MAY 19, 1993Closed
Complaint · Partial · Safety · 120 employees at the site · Closed Jun 25, 1993
Incident on Dec 29, 1992 (fatal): Employee killed when caught in roller
At approximately 9:27 a.m. on December 29, 1992, Employee #1 was applying a powd ered lubricant to a rotating rubber roller that supported a large section of ste el pipe in the fabrication process. Employee #1 was caught between the unguarded roller and pipe, and drawn into the machine. He sustained fatal injuries.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 4002 A
Serious
$5,000
$5,000
Jan 4, 1993
Final
Inspection 112043286 OPENED JUL 9, 1991Closed
Complaint · Partial · Safety · 180 employees at the site · Closed May 15, 1992
Incident on Mar 13, 1991 (fatal): Employee dies after being crushed between forklift and pipe
At approximately 3:00 p.m. on March 9, 1991, Employee #1 was looking into a stee l pipe to see what areas required patching. As he turned from looking inside the pipe, he was struck by a backing forklift and crushed between the pipe and the forklift's right front tire or fender. Employee #1 was airlifted to San Bernardi no (CA) County Hospital, where he died on March 31, 1991.
Citation and rule
Type
Proposed
Current
Issued
Status
Citation 1, item 1
29 CFR 3661 C
Other-than-serious
$0
$0
Apr 1, 1991
Closed
Citation 2, item 1
29 CFR 3664 A01
Serious
$2,000
$2,000
Apr 1, 1991
Closed
Inspection 112206594 OPENED FEB 26, 1991Closed
Complaint · Complete · Safety · 140 employees at the site · Closed Feb 20, 1992
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Adelanto site logged 1 recordable injury or illness among about 151 workers: 0.5 per 100 full-time workers, against a median of 3.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Northwest Pipe Company
Adelanto · 2025
151
1
0
0.5
3.6
NWPX Tracy
Tracy · 2025
105
4
1
5.6
3.6
Northwest Pipe Company
Tracy · 2023
100
3
0
3.0
3.6
Northwest Pipe
Adelanto · 2019
125
4
1
2.8
3.6
Included with any plan: 9 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Alert subscribers get notified of each newly cited employer in California the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.