Nutrablend Foods LLC: OSHA inspections and violations
Lancaster, New York · All Other Miscellaneous Food Manufacturing · NAICS 311999
4inspections
7citation items
$25,462current penalties
Oct 2, 2019last inspection
OSHA has inspected Nutrablend Foods LLC 4 times in New York since 2015.
The latest one began on Oct 2, 2019 after a complaint, in Lancaster.
Those inspections ended with 7 citation items: 7 serious.
Penalties were first proposed at $38,576 and now stand at $25,462, 34% lower after settlements or reviews.
Lockout/tagout comes up most often in these citations: 6 items under 1910.147.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,859, and Nutrablend Foods LLC averages $12,731 (2 cited inspections).
Nutrablend Foods LLC also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
New York · latest 90 days of OSHA records
361employers cited
Get notified the morning OSHA posts each new citation in New York: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2016, the Lancaster site logged 4 recordable injuries or illnesses among about 223 workers: 2.0 per 100 full-time workers, against a median of 3.0 for its industry. Those cases cost 174 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Custom Dry Blending
Lancaster · 2016
223
4
3
2.0
3.0
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Dec 11, 2018, Lancaster: Hospitalization · fractures · leg(s), unspecified
An employee was riding on a forklift when his left leg was crushed between the truck and a pole. The leg was broken.
Powdered product was being dispensed into a bag when the powder stopped coming out of the fill spout. An employee reached up into the fill tube with his left hand/arm until his fingers reached the sliding gate valve, which opens/closes to start and stop the product flow. He pressed a button on a nearby solenoid valve with his right hand, opening the sliding gate valve in the fill tube. He then…
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(4)(ii)(b)
(B) Specific procedural steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy;
29 CFR 1910.147(c)(4)(ii)(d)
(D) Specific requirements for testing a machine or equipment to determine and verify the effectiveness of lockout devices, tagout devices, and other energy control measures.
Alert subscribers get notified of each newly cited employer in New York the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.