Oglesby Construction Inc: OSHA inspections and violations
Avon Lake, Ohio · Asphalt Paving Mixture and Block Manufacturing · NAICS 324121
5inspections
5citation items
$14,544current penalties
Jul 12, 2023last inspection
Since 1989, OSHA inspectors have visited Oglesby Construction Inc in Ohio 5 times.
The most recent inspection opened on Jul 12, 2023 on a referral, in Norwalk.
In all, OSHA issued 5 citation items: 5 serious.
The proposed penalties came to $28,593; today they stand at $14,544, 49% less.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Oglesby Construction Inc averages $13,059 across 1 cited inspection.
Oglesby Construction Inc also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
260employers cited
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
OSHA records show Oglesby Construction Inc at 6 sites in 2 states. Together they've had 6 inspections and $15,932 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 6 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Norwalk site logged 10 recordable injuries or illnesses among about 144 workers: 8.2 per 100 full-time workers, against a median of 2.2 for its industry. Those cases cost 328 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Oglesby Construction - Ohio
Norwalk · 2025
144
10
6
8.2
2.2
Included with any plan: 9 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was using a table saw to cut a 4x8 sheet of plywood when his right thumb contacted the saw blade, resulting in a thumb and index finger amputation. The saw blade was not guarded at the time.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(c) Exposure control—(1) Exposure Control Plan. (i) Each employer having an employee(s) with occupational exposure as defined by paragraph (b) of this section shall establish a written Exposure Control Plan designed to eliminate or minimize employee exposure.
(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po
(2) The employer shall ensure that each affected employee uses eye protection that provides side protection when there is a hazard from flying objects. Detachable side protectors (e.g. clip-on or slide-on side shields) meeting the pertinent requirements of this section are acceptable.
29 CFR 1926.300 · Tools—Hand and Power: general requirements
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.