Inspection 348093956 OPENED MAR 10, 2025Closed
7311 Nw 77th Street, Medley, FL 33166 · Other Concrete Product Manufacturing · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
OSHA has inspected Oldcastle Infrastructure, Inc. 3 times in Florida since 2021.
The latest one began on Mar 10, 2025 after a complaint, in Medley.
Those inspections ended with 3 citation items: 2 serious and 1 other-than-serious.
Penalties were first proposed at $22,696 and still stand at $22,696.
Lockout/tagout comes up most often in these citations: 2 items under 1910.147.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Oldcastle Infrastructure, Inc. averages $22,696 (1 cited inspection).
It reported 1 severe injury to OSHA since 2015.
Florida · latest 90 days of OSHA records
338employers cited
Get notified the morning OSHA posts each new citation in Florida: the employer, the site address, the rules broken and the penalty.
See who gets cited nextLatest cited in Florida
Checking a subcontractor, a client or your own company? Watch Oldcastle Infrastructure, Inc. and get notified the morning OSHA posts a new citation for it.
Watch this companyOSHA records show Oldcastle Infrastructure, Inc. at 22 sites in 10 states. Together they've had 34 inspections and $86,171 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 22 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
See plans7311 Nw 77th Street, Medley, FL 33166 · Other Concrete Product Manufacturing · OSHA's record · Phone and website on Google Maps
No citations from this inspection.
7311 Nw 77th Street Medley, Medley, FL 33166 · Other Concrete Product Manufacturing · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 29 CFR 1910.29(b)(1) · Fall protection systems in general industry |
Serious | $11,348 | $11,348 | Sep 5, 2025 | Open |
| Citation 1, item 2 29 CFR 1910.147(c)(4)(i) · Lockout/tagout |
Serious | $11,348 | $11,348 | Sep 5, 2025 | Open |
| Citation 2, item 1 29 CFR 1910.147(c)(1) · Lockout/tagout |
Other-than-serious | $0 | $0 | Sep 5, 2025 | Open |
630 Business Park Road, Midway, FL 32343 · Other Concrete Product Manufacturing · OSHA's record · Phone and website on Google Maps
Incident on Feb 24, 2021: Employee partially amputates two fingers while working with
At 10:50 a.m. on February 23, 2021, Employee #1 was handling a 15-inch 2 x 4 dunnage leg that had fallen over, positioning it beneath a metal pallet form to support it while being lowered with a DEMAG 25-ton overhead crane, Model Number: DEMAG 18111. The crane was used with certified rigging, including 4-alloy chain slings and hooks with safety latches. During the lowering process, the pallet became caught on the inner core due to excess dried concrete, preventing it from descending properly. As the crane hoist was lowered, slack developed in the rigging, causing the pallet to drop approximately 12 inches onto the dunnage, which was being held by Employee #1. The employee's right hand was caught under the load, resulting in a partial amputation of the middle and ring fingers of the right hand. Emergency services transported the employee to the hospital, where he was admitted and treated for the injury.
No citations from this inspection.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Feb 24, 2021, Midway: Hospitalization, amputation · amputations · finger(s), fingernail(s), unspecified
On February 24, 2021, an employee was helping install a 250-pound metal pallet on a precast concrete form. The pallet became bound on the inner core of the form while an overhead crane was lowering it into place. The employee began moving dunnage below while the crane held the pallet about 12 inches above the ground. The pallet fell onto the employee's right ring and middle fingers, catching them…
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.147(c)(1)
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
29 CFR 1910.147(c)(4)(i)
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.29(b)(1)
(1) The top edge height of top rails, or equivalent guardrail system members, are 42 inches (107 cm), plus or minus 3 inches (8 cm), above the walking-working surface. The top edge height may exceed 45 inches (114 cm), provided the guardrail system meets all other criteria of paragraph (b) of this section (see Figure D-11 of this section).
Alert subscribers get notified of each newly cited employer in Florida the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.