Omnia Advanced Materials LLC has 2 OSHA inspections on record in New York, the first in 2024.
OSHA's last visit started on Sep 4, 2024 on a referral, in Beaver Falls, and the case has not closed yet.
Across those inspections OSHA issued 3 citation items: 2 serious and 1 other-than-serious.
OSHA proposed $26,481 in penalties. After settlements and reviews the total is $10,758, down 59%.
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. Omnia Advanced Materials LLC averages $5,379 over 2 cited inspections in that time.
Omnia Advanced Materials LLC also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
New York · latest 90 days of OSHA records
353employers cited
Get notified the morning OSHA posts each new citation in New York: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Omnia Advanced Materials LLC and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Beaver Falls site logged 5 recordable injuries or illnesses among about 66 workers: 7.9 per 100 full-time workers, against a median of 1.9 for its industry. Those cases cost 170 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Omnia Advanced Materials LLC
Beaver Falls · 2025
66
5
3
7.9
1.9
Included with any plan: 4 more yearly logs from these sites, back to 2021, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Aug 30, 2024, Beaver Falls: Hospitalization · fractures · wrist(s) and arm(s) n.e.c.
An employee was unjamming paper from calendar stack rollers when their hands became stuck in the rollers and they sustained a broken left wrist and arm.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(d)(1)
(d) Hazard assessment and equipment selection. (1) The employer shall assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE). If such hazards are present, or likely to be present, the employer shall:
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
(7) Openings. The employer must ensure that each employee on a walking-working surface near an opening, including one with a chute attached, where the inside bottom edge of the opening is less than 39 inches (99 cm) above that walking-working surface and the outside bottom edge of the opening is 4 feet (1.2 m) or more above a lower level is protected from falling by the use of:
Other paper (except newsprint) mills employers in New York
Alert subscribers get notified of each newly cited employer in New York the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.