OSHA SearchOSHA records by employer

Opportunity Development Centers, Inc.: OSHA inspections and violations

Plover, Wisconsin · Wood Container and Pallet Manufacturing · NAICS 321920

1inspections
5citation items
$12,000current penalties
Mar 17, 2020last inspection

OSHA has inspected Opportunity Development Centers, Inc. once in Wisconsin.

The inspection began on Mar 17, 2020 on a referral, in Plover.

That inspection ended with 5 citation items: 5 serious.

Penalties were first proposed at $46,845 and now stand at $12,000, 74% lower after settlements or reviews.

Lockout/tagout comes up most often in these citations: 3 items under 1910.147.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Opportunity Development Centers, Inc. averages $12,000 (1 cited inspection).

It reported 1 severe injury to OSHA since 2015.

Opportunity Development Centers, Inc.: OSHA citation items per year, 2020 to 2020
Citation items per year, by inspection date.

Wisconsin · latest 90 days of OSHA records

229employers cited

3 of them in the same industry

Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Wisconsin

Checking a subcontractor, a client or your own company? Watch Opportunity Development Centers, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344701354 OPENED MAR 17, 2020Closed

Referral · Complete · Safety · 16 employees at the site · Closed May 13, 2021

2400 Willow Dr., Plover, WI 54467 · Wood Container and Pallet Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Mar 3, 2020: Employee's thumb is amputated in up-cut saw

At 8:45 a.m. on March 3, 2020, Employee #1 would place the wood to be cut on the infeed roller system. Once the board was cut, the employee would take the boards off the outfeed side and stack the pile. The infeed side of the enclosed guard had adjustable guards which were not adjusted. Each new set of boards required the operator to cut 1-2 off to ensure a true square cut. The employee placed his hand in the outfeed section of the inadequately guarded outfeed opening and was adjusting the board since the operator had pushed the boards too far forward. As the employee was pushing the board back, the machine operator had activated the clamp, which was used to hold the boards in place. A short period after activating the clamp, the operator activated the up-cut saw with the two-hand control. The clamp had caught between the employee's hand and board not releasing as the saw blade came up, striking the employee's thumb, resulting in an amputation. The employee was treated without hospitalization. The investigation revealed that the up-cut saw had a clear enclosure in the front where the clamp and saw blade were visible to the operator. The distance between the outfeed guard and saw blade was approximately 18 inches. The operator would have been positioned nearly directly in front of the saw blade.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(6)(i) · Lockout/tagout
Serious$8,675$2,500Apr 15, 2020Final
Citation 1, item 1b
29 CFR 1910.147(d) · Lockout/tagout
Serious$8,675$0Apr 15, 2020Final
Citation 1, item 1c Serious$8,675$0Apr 15, 2020Final
Citation 1, item 4
29 CFR 1910.213(r)(4) · Woodworking machinery
Serious$12,145$7,000Apr 15, 2020Final
Citation 1, item 5
29 CFR 1910.242(b) · Hand and power tools
Serious$8,675$2,500Apr 15, 2020Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Mar 3, 2020, Plover: Amputation · amputations · fingertip(s)

The operator of the up-cut saw pressed the lever to lock down the guard and start the saw cycle. As the guard was lowered an employee, who was responsible for take-off, reached to adjust the wood that was being cut. The blade contacted his right thumb, amputating the tip.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(6)(i)

(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.

29 CFR 1910.147(d)

(d) Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence:

29 CFR 1910.147(f)(3)(ii)(d)

(D) Each authorized employee shall affix a personal lockout or tagout device to the group lockout device, group lockbox, or comparable mechanism when he or she begins work, and shall remove those devices when he or she stops working on the machine or equipment being serviced or maintained.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.242 · Hand and power tools

Other wood container and pallet manufacturing employers in Wisconsin

Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.