Orion Instruments: OSHA inspections and violations
Baton Rouge, Louisiana · Other Metal Valve and Pipe Fitting Manufacturing · NAICS 332919
1inspections
2citation items
$1,680current penalties
Feb 17, 2016last inspection
OSHA inspectors have visited Orion Instruments in Louisiana one time.
It opened on Feb 17, 2016 as a planned inspection, in Baton Rouge.
In all, OSHA issued 2 citation items: 2 serious.
The proposed penalties came to $2,800; today they stand at $1,680, 40% less.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Orion Instruments averages $1,680 across 1 cited inspection.
Orion Instruments also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Louisiana · latest 90 days of OSHA records
19employers cited
Get notified the morning OSHA posts each new citation in Louisiana: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2017, the Baton Rouge site logged 0 recordable injuries or illnesses among about 101 workers: 0.0 per 100 full-time workers, against a median of 0.3 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Orion Instruments
Baton Rouge · 2017
101
0
0
0.0
0.3
Included with any plan: 1 more yearly log from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
Other other metal valve and pipe fitting manufacturing employers in Louisiana
Alert subscribers get notified of each newly cited employer in Louisiana the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.