OSHA SearchOSHA records by employer

Oshkosh Converting LLC: OSHA inspections and violations

Oshkosh, Wisconsin · All Other Converted Paper Product Manufacturing · NAICS 322299

1inspections
5citation items
$4,936current penalties
Mar 27, 2024last inspection

OSHA inspectors have visited Oshkosh Converting LLC in Wisconsin one time.

It opened on Mar 27, 2024 after a complaint, in Oshkosh.

In all, OSHA issued 5 citation items: 4 serious and 1 other-than-serious.

The proposed penalties came to $13,320; today they stand at $4,936, 63% less.

The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Oshkosh Converting LLC averages $4,936 across 1 cited inspection.

Oshkosh Converting LLC: OSHA citation items per year, 2024 to 2024
Citation items per year, by inspection date.

Want to know if OSHA cites Oshkosh Converting LLC again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 347377574 OPENED MAR 27, 2024Closed

Complaint · Partial · Safety · 13 employees at the site · Closed Feb 3, 2026

101 West Waukau Avenue, Oshkosh, WI 54902 · All Other Converted Paper Product Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(1) · Machine guarding
 Serious$3,918$2,742Jul 12, 2024Final
Citation 1, item 2a
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
 Serious$3,134$2,194Jul 12, 2024Final
Citation 1, item 2b
29 CFR 1910.219(e)(3)(i) · Belts, pulleys and power-transmission parts
 Serious$3,134$0Jul 12, 2024Final
Citation 1, item 2c
29 CFR 1910.219(f)(3) · Belts, pulleys and power-transmission parts
 Serious$3,134$0Jul 12, 2024Final
Citation 2, item 1
29 CFR 1910.305(b)(1)(i) · Electrical wiring methods
 Other-than-serious$0$0Jul 12, 2024Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

29 CFR 1910.219(e)(3)(i)

(3) Vertical and inclined belts. (i) Vertical and inclined belts shall be enclosed by a guard conforming to standards in paragraphs (m) and (o) of this section.

29 CFR 1910.305 · Electrical wiring methods

Other all other converted paper product manufacturing employers in Wisconsin

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.