Parksite, Inc. has one OSHA inspection on record in New Jersey.
OSHA opened it on May 19, 2022 on a referral, in North Brunswick.
From that inspection OSHA issued 2 citation items: 2 serious.
OSHA proposed $22,376 in penalties. After settlements and reviews the total is $11,188, down 50%.
For context, across all retail employers the median penalty per cited inspection since 2015 is $1,750. Parksite, Inc. averages $11,188 over 1 cited inspection in that time.
Parksite, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
New Jersey · latest 90 days of OSHA records
270employers cited
Get notified the morning OSHA posts each new citation in New Jersey: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the North Brunswick site logged 2 recordable injuries or illnesses among about 56 workers: 3.4 per 100 full-time workers, against a median of 3.5 for its industry. Those cases cost 32 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Parksite 115
North Brunswick · 2025
56
2
2
3.4
3.5
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
May 17, 2022, North Brunswick: Hospitalization, amputation · amputations · finger(s), fingernail(s), unspecified
An employee was cutting a piece of wood with a miter saw. The wood pulled the employee's left thumb into the sawblade, which severely lacerated it resulting in amputation.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po
(a) General requirements. Each employer shall be responsible for the safe condition of tools and equipment used by employees, including tools and equipment which may be furnished by employees.
Other other building material dealers employers in New Jersey
Alert subscribers get notified of each newly cited employer in New Jersey the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.