OSHA SearchOSHA records by employer

Paul Deal: OSHA inspections and violations

Smyrna, Tennessee · Plumbing and Heating Equipment and Supplies (Hydronics) Merchant Wholesalers · NAICS 423720

1inspections
9citation items
$7,500current penalties
Nov 26, 2019last inspection

Paul Deal has one OSHA inspection on record in Tennessee.

OSHA opened it on Nov 26, 2019 as a planned inspection, in Smyrna.

From that inspection OSHA issued 9 citation items: 7 serious and 2 other-than-serious.

OSHA proposed $7,500 in penalties and the amount has not been reduced.

Most often, OSHA cited 1910.215, grinders and abrasive wheels (3 items).

For context, across all wholesale employers the median penalty per cited inspection since 2015 is $3,425. Paul Deal averages $7,500 over 1 cited inspection in that time.

Paul Deal: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Tennessee · latest 90 days of OSHA records

344employers cited

Get notified the morning OSHA posts each new citation in Tennessee: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Tennessee

Checking a subcontractor, a client or your own company? Watch Paul Deal and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344477989 OPENED NOV 26, 2019Closed

Planned · Complete · Safety · 43 employees at the site · Closed Sep 11, 2020

251 Mayfield Drive, Smyrna, TN 37167 · Plumbing and Heating Equipment and Supplies (Hydronics) Merchant Wholesalers · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR TCA 50-3-105(1)
Serious$1,400$1,400Mar 25, 2020Final
Citation 1, item 2
29 CFR TCA 50-3-105(1)
Serious$1,200$1,200Mar 25, 2020Final
Citation 1, item 3
29 CFR 1910.147(c)(1) · Lockout/tagout
Serious$1,400$1,400Mar 25, 2020Final
Citation 1, item 4
29 CFR 1910.215(a)(2) · Grinders and abrasive wheels
Serious$1,000$1,000Mar 25, 2020Final
Citation 1, item 5
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
Serious$1,000$1,000Mar 25, 2020Final
Citation 1, item 6
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Serious$1,000$1,000Mar 25, 2020Final
Citation 1, item 7
29 CFR 1910.305(b)(2)(i) · Electrical wiring methods
Serious$400$400Mar 25, 2020Final
Citation 2, item 1
29 CFR TDLWD RULE 800-01-09-.06(2)
Other-than-serious$100$100Mar 25, 2020Final
Citation 2, item 2
29 CFR 1910.303(b)(2) · Electrical equipment, general requirements
Other-than-serious$0$0Mar 25, 2020Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(a)(2)

(2) Guard design. The safety guard shall cover the spindle end, nut, and flange projections. The safety guard shall be mounted so as to maintain proper alignment with the wheel, and the strength of the fastenings shall exceed the strength of the guard, except:

29 CFR 1910.215(a)(4)

(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.

29 CFR 1910.303 · Electrical equipment, general requirements

29 CFR 1910.305 · Electrical wiring methods

Other plumbing and heating equipment and supplies (hydronics) merchant wholesalers employers in Tennessee

Alert subscribers get notified of each newly cited employer in Tennessee the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.