OSHA SearchOSHA records by employer

Pentair Flow Technologies, LLC: OSHA inspections and violations

Ashland, Ohio · Iron Foundries · NAICS 331511

2inspections
7citation items
$36,629current penalties
Dec 12, 2019last inspection

Since 2019, OSHA inspectors have visited Pentair Flow Technologies, LLC in Ohio 2 times.

The most recent inspection opened on Dec 12, 2019 on a referral, in Ashland.

In all, OSHA issued 7 citation items: 7 serious.

The penalties, $36,629 in total, stand where OSHA first set them.

The rule cited most here is 1910.147 (lockout/tagout), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Pentair Flow Technologies, LLC averages $18,314 across 2 cited inspections.

Pentair Flow Technologies, LLC also files yearly injury logs with OSHA, summarized below.

It reported 1 severe injury to OSHA since 2015.

Pentair Flow Technologies, LLC: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Ohio · latest 90 days of OSHA records

267employers cited

Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Ohio

Checking a subcontractor, a client or your own company? Watch Pentair Flow Technologies, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Company-wide record

OSHA records show Pentair Flow Technologies, LLC at 3 sites in 3 states. Together they've had 5 inspections and $66,979 in current penalties.

We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.

Included with any plan: the site-by-site record for all 3 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.

See plans

Inspection history

Inspection 344507264 OPENED DEC 12, 2019Closed

Referral · Partial · Safety · 320 employees at the site · Closed Aug 14, 2020

750 E. 9th Street, Ashland, OH 44805 · Iron Foundries · OSHA's record · Phone and website on Google Maps

Incident on Dec 4, 2019: Employee amputates fingers in molding machine

At 10:00 p.m. on December 4, 2019, an employee was advancing the bottom plate on the mold machine. The employee, a 20-year old male, adjusted a sand mold exiting the hunter #2 molding machine. When the board pusher advanced, it trapped the employee's hand between the board pusher and the sand mold bottom plate. The employee was pushed a few feet down the line, and, when the board pusher pushed the sand mold onto the metal pouring conveyor, the employee's hand was crushed against the conveyor. The employee was taken to the hospital, where three fingers were subsequently amputated. The employee was hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
Serious$10,603$10,603Mar 10, 2020Final
Citation 1, item 1b
29 CFR 1910.147(c)(7)(i) · Lockout/tagout
Serious$0$0Mar 10, 2020Final
Citation 1, item 1c
29 CFR 1910.147(d) · Lockout/tagout
Serious$0$0Mar 10, 2020Final
Citation 1, item 2
29 CFR 1910.212(a)(1) · Machine guarding
Serious$10,603$10,603Mar 10, 2020Final
Citation 1, item 3
29 CFR 1910.1030(f)(1)(i) · Bloodborne pathogens
Serious$10,603$10,603Mar 10, 2020Final

Inspection 344512132 OPENED DEC 12, 2019Closed

Complaint · Partial · Health · 320 employees at the site · Closed Aug 1, 2022

750 E. 9th Street, Ashland, OH 44805 · Iron Foundries · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1b
29 CFR 1910.1053(f)(1) · Silica dust in general industry
Serious$0$4,820May 13, 2020Final
Citation 1, item 1c
29 CFR 1910.134(d)(1)(iii) · Respiratory protection
Serious$0$0May 13, 2020Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2016, the Ashland site logged 14 recordable injuries or illnesses among about 283 workers: 5.1 per 100 full-time workers, against a median of 1.9 for its industry. Those cases cost 199 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
Pentair Flow Technologies LLC, Ashland
Ashland · 2016
283 1445.11.9

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Nov 12, 2024, Ashland: Amputation · amputations, avulsions, enucleations unspecified · finger or thumb tip(s), nail(s)

On November 12, 2024, an employee was manually transferring a 164-pound casting from one pallet skid to another. The casting bounced off the skid and pinched their right little finger against a wire rack, resulting in a fingertip amputation.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.1030 · Bloodborne pathogens

29 CFR 1910.1030(f)(1)(i)

(f) Hepatitis B vaccination and post-exposure evaluation and follow-up—(1) General. (i) The employer shall make available the hepatitis B vaccine and vaccination series to all employees who have occupational exposure, and post-exposure evaluation and follow-up to all employees who have had an exposure incident.

29 CFR 1910.1053 · Silica dust in general industry

29 CFR 1910.1053(f)(1)

(f) Methods of compliance—(1) Engineering and work practice controls. The employer shall use engineering and work practice controls to reduce and maintain employee exposure to respirable crystalline silica to or below the PEL, unless the employer can demonstrate that such controls are not feasible. Wherever such feasible engineering and work practice controls are not sufficient to reduce employee exposure to or below the PEL, the employer shall nonetheless use them to reduce employee exposure to the lowest feasible level and shall supplement them with the use of respiratory protection that complies with the requirements of paragraph (g) of this section.

29 CFR 1910.134 · Respiratory protection

29 CFR 1910.134(d)(1)(iii)

(iii) The employer shall identify and evaluate the respiratory hazard(s) in the workplace; this evaluation shall include a reasonable estimate of employee exposures to respiratory hazard(s) and an identification of the contaminant's chemical state and physical form. Where the employer cannot identify or reasonably estimate the employee exposure, the employer shall consider the atmosphere to be IDLH.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.212 · Machine guarding

Other iron foundries employers in Ohio

Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.